VCDS Calibrate ESP Steering Angle Sensor for VW Audi

Posted on by VCDS

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

This training article show a guide on how to sue VCDS to calibrate ESP steering angle sensor calibration for VW Audi.Try it at your own risk, chinaobd2.com is not responsible for any damage or problems.

 

This procedure details how to perform the zero position calibration for the Steering Angle Sensor (G85) in many VW/Audi vehicles equipped with ESP (Electronic Stability Program). This procedure should be performed when vehicle alignment is performed or if any of the following components have been removed or replaced:

*ABS/EDL/ASR/ESP control unit (J104)

*Steering Angle Sensor (G85)

*Steering Column

 

Preparations:

VCDS 17.8.1 Full+Loader V2/V4 Free Download

 

 

There are certain test conditions that must be met before doing this procedure:

*Start the vehicle.

*Turn the steering wheel one turn to the right and one turn to the left.

*Drive in a short distance straight line on a level surface at a speed not higher than 20 km/h.

* If the steering wheel is straight during the test drive then stop the vehicle with the wheels pointed straight

*Ensure that the steering wheel is not moved again.

* Keep the engine running and do not switch off the ignition.

 

 

VW Golf, GTI, Jetta, and Audi TT Steering Angle Sensor (G85) zero position calibration

[Select]

[03

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

This Post: VCDS Calibrate ESP Steering Angle Sensor for VW Audi From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Tags:

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *