VAS 5054A Firmware Update (esp. for bad BT module)

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

Here you go mate, what chinaobd2 posted long time ago regarding VAS 5054A firmware update, incl. how to upgrade, where to replace firmware.

First, THANKS fantomel for this.

Download vas5054a firmware update fix: (by Fantomel)

https://mega.nz/#!Yckn2Qoa!XDWayKXbrN8fTqogwoA_26ECIMYCctHl11zUKB6Rdrg

If your vas 5054a head does not have AMB2300 BT Module then you will have a problem with firmware newer then 1.20.020

To fix this and make it work you must replace after install of package these files from 1.20.020 to your current version

for odis-s 2.2.3 and 2.2.4

C:\ODIS-DIAG-MODULES\PDUAPI\VEN-SOFTING\1.20.023\VeCom\VAS5054

for odis-s 2.2.6

C:\Program Files\Softing\D-PDU API\1.20.029\VeCom\VAS5054

for odis-e 6.2.2?

C:\Program Files\Softing\D-PDU API\1.20.023\VeCom\VAS5054

for odis-s 3.0.0

C:\Program Files\Softing\D-PDU API\1.20.034\VeCom\VAS5054

How to update vas 5054a firmware:

How to tell a good VAS 5054A Bluetooth by PCB:

There are two types of Bluetooth modules with vas 5054a scanners

High-quality 5054 with Good Bluetooth module A

(src: https://www.chinaobd2.com/wholesale/vas5054-odis-original-oki-chip.html )

Common vas 5054a with Normal Bluetooth module B

Tip: using 5054a via bluetooth connection

The diagnostic base system can access the VAS 5054A via Bluetooth. After a connection via Bluetooth to the VAS 5054A has been set up, the Bluetooth software provides a virtual serial COM port (Bluetooth Serial Port Profile). The Diagnostic Base System uses this COM port to communicate with the VAS 5054A. You need to specify this port when you install the diagnostic application.

This Post: VAS 5054A Firmware Update (esp. for bad BT module) From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Tags: cat ODIS original VAS 5054 VAS 5054A wholesale