Various Errors Occur With Lonsdor K518ISE/K518S devices

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

Here are some possible solutions for various errors that may occur with Lonsdor K518ISE/Lonsdor K518S devices:

• Cannot Connect to Vehicles:

1. Ensure that you are using the original OBD cable.
2. Check if the device supports the specific vehicle model.
3. Make sure that the vehicle and the device are properly connected.

• Code Prompts:

1. Contact after-sales support for repair if you receive error codes such as
   

   How useful was this post?

   Click on a star to rate it!

   Submit Rating

   Average rating / 5. Vote count:

   This Post: Various Errors Occur With Lonsdor K518ISE/K518S devices From ChinaOBD2 Official Blog
   Please keep this link if you copy the post!