Unlock Version FVDI 2018 errors and solutions

Posted on by VCDS

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

Post is on unlock version FVDI 2018 errors and solutions, as well as the test reports.

 

Question 1: Can FVDI 2018 delete the ISM of Mercedes?

And can it read vgs3 and write it into the automatic transmission

(Mercedes 7g tronic)?

A: Yes, FVDI 2018 can do.

 

Question 2: I want to know if FVDI 2018 can support:

– Renewal of FBS4 7G Tronic units 722.9 (VGSNAG2). ALL BY OBD or internal CANBUS.

– Renewal of FBS4 CRD 3.X Engine Control Units. ALL BY OBD or internal CANBUS.

A: The first one is yes, the second one is No.

 

Question 3. QuickLoader.exe -Application Error

The application was unable to start correctly (0xc000007b).Click OK to close the application.

fvdi-2018-unable-to-start-01

Solution: Run the “Patch” file, right click on the software icon on the desk, open the file position and you will find it.

 

Question 4: Where to download fvdi 2018 newest version?

FDVI 2018 V3.0

https://mega.nz/#!KRBzVIrD!uE0ZGjYAbTv0sEZPQjLN0jejex_yI0IF9R3Wad21f7g

 

Question 5: Online activation: Connection to server…failed

fvdi-2018-faq-02

Solution: the server is maintaining.

 

Question 6: FVDI 2018 vag 18 software get error as below:

fvdi-2018-faq-03

Solution: Your computer has no Chinese character library, please reset the language as English.

 

Question 7:

Fvdi 2014: Everytime i start up vag V18.0 with keyreader attached, the program shuts off.

Vag 21.0 starts fine with keyreader attached, here the MM7 tool does work proper.

 

I run it on W7 32 and windows xp, no virus scan.

Does anyone have the same problem, and a solution.

I am considering buying a 2018 Fvdi with vag V18.0 and V24.o

 

Answer: goo inside this folder and remove tag and post result

C:\Program Files (x86)\Abrites Commander Software

List\Common\TagKeyTool

C:\Program Files (x86)\Abrites Commander Software List\Common\Tag

 

Answer: Finally, So i removed the tag and tagkeytool from c folder.

And it is fine now.

Question 8:

Can please someone help me. I have an 2018 FVDI and my problems is this.
The UBS connector from the PCB , has got 1 pin broken , and wanted to replace it from pcb.

But when i desolder the old one , one pad from the pin nr. 2 of the usb broken … the White wire ( Data – ) .

Now even i soldera new connector or solder directly the wires on the pcb , windows don’t recognize the unit. It see it like a malfunction … because the white wire don’t communicate.

Can you tell me the corresponding pcb location of this pin n2 of the usb connector ?

Answer: Before you touch any Car —> training your Solder skill

Question 9:

Hi, my 2015 FVDI I cannot use VW v24, it only works with V18.0
When the VW V24.0 was selected it sends the message “Hours left 0”
My FW version is 2.18 and 2.10.

My 2015 FVDI DVD is damaged.

The provider does not send me the link to download the software
Do I have to update the firmware for VW version 24 to work?

Answer: Register email and password – Then download. It works if you have “genuine” Fly product. http://flyobd.com/shop/download-center/

 

Question 10: I have fvdi 2018, immoplus 13.6 work with fvdi interface??? how???
when I start soft write”can`t find vvdi interface.reconnect interface and try again”

Answer: With fvdi2014 works on win xp. Just start immoplus loader first and wait a while

 

Question 11:

Has anyone added the key to the Opel Meriva B 2013 year for the FVDI 2015 version?

Answer: 2010-2012 Meriva B with FVDI2014 no problem. About newer i don’t know…

Question 12: Immoplus on FVDI 2018 not running, Error 5. How to solve this ?

Answer: Here this Error 5 fix:
Start program, click ADD then Remove Device. Wait pop up.
Disconnect USB and reconnect again, windows will detect USB ask install driver.
Go to program file….AVDI driver and install

https://mega.nz/#!hYJWTIaC!KHMziWq5Ei8B-x2z09yHaie2pk3-naVHvzq8bu40GY4

 

Question 13: Astra J 2012 , new body control unit, I read pin, change VIN and tried to key learning but once stored ones are deleted and try to program new I get message that limit is exceeded

Answer: reset battery and re-learning key again

 

Question 14:

I’m looking for a 2014 version of this but only thing coming up in searches online is 2018 versions, anyone know where to buy one from, reliable source, thanks in advance,

Answer: https://www.chinaobd2.com/wholesale/fly-fvdi-full-version-18-software.html

It’s original from fvdiobd.com.

Question 15:

Can someone tell me WHERE and which FVDI to buy??
I was look on many sites and really don’t know where to buy.
I have a friends which buy FVDI and have a bad experience (Tool is lock,no support,not work …)
I found 2 sites

http://www.fvdiobd.com/fvdi2018-abrites-commander-full-version.html

http://flyobd.com/en/2018/03/05/fvdi2018/

Answer: the first one will be locked because the second one is original Fly product.

 

Question 16: error message “Performing HW synchronization over internet…Failed to synchronize HW, Hours left:0.

ATTENTION: Please check whether internet connection is available in order to perform hardware synchronization. If the hardware is not synchronized in the next 0 hours it will be not able to communicate with the vehicle. Please confirm that you have read and understand this warning.

fvdi-2018-faq-04 fvdi-2018-faq-05

Solution: It is normal prompt. Just click “OK” to continue.

 

Part 2: FVDI 2018 Test results:

  1. Key learning audi a3 2007
    fvdi rb8
    read 7 bit ok
    read pin ok
    learning spare key – ok
    Key learning successfully…

Fiat 5.4: Fiat Ducato 2009 —> 3 Key’s Learning OBD Work Perfect

Question: Question: And remote also work? I tried with Ducato 2010, Immo OK, but remote doesn’t work. Didn’t learned keys with FVDI, used other OBD SW.

Answer:

Yes, work Perfect

Remote work too
First read BSI to find PIN
Next step was programming 3 new Key

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

This Post: Unlock Version FVDI 2018 errors and solutions From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Tags:

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *