Two Ways to Read MQB NEC35xx IMMO with VVDI Key Tool Plus/VVDI2+VVDI Prog

As we known, after activating Xhorse MQB Authorization, Xhorse VVDI Key Tool Plus Pad or VVDI2+VVDI Prog can read MQB NEC35xx Locked IMMO Data to add new key and do all keys lost (AKL needs synchronize data by third-party). There are two wiring diagrams for using: by Lift PIN diagram and by Cut PIN diagram.

Xhorse devices required:

Xhorse VVDI Key Tool Plus Pad Full Configuration (has VW software and Prog function)

VVDI2 Full Version Plus VVDI Prog

Assistant tools recommended:

• Scaling powder
• Hot-air gun
• Enameled wire gummed paper
• Electron microscope
• Tweezer and operating knife with pointed tip

 

Tips to activate Xhorse VW MQB license:

• Register your Key Tool Plus Full Configuration/ VVDI2 programmer before activation
• Buy the Xhorse VW MQB Licenseand provide your device SN (incl. Key Tool Plus/Xhorse VVDI2 and VVDI Prog) to our customer service for activation.
• Once the MQB authorization is activated, please use the corresponding device to read data. If you use other programmerto read, then the VW MQB add key/all keys function will not be supported.

Part 1:

Read MQB NEC35xx IMMO data with VVDI Key Tool Plus

1.Xhorse Key Tool Plus MQB Dashboard NEC3525 Lift Pin & Cut Wire Tutorial

By Lift PIN diagram:

By Cut PIN diagram:

The guide to read MQB NEC3526 is the same as NEC3525.

By Cut PIN diagram:

 

2.Xhorse Key Tool Plus Pad MQB Dashboard NEC3532 Cut Wire Advanced Tutorial

By Cut PIN diagram:

 

3.How to read MQB Locked NEC35xx by VVDI Key Tool Plus

i.e MQB NEC3525 dashboard

Part 2: Read MQB NEC35xx IMMO data with Xhorse VVDI2+ VVDI Prog

i.e. MQB NEC3526

How to read MQB Dashboard Data by VVDI Prog and VVDI2

By Lift PIN diagram:

By Cut PIN diagram:

 

 

This Post: Two Ways to Read MQB NEC35xx IMMO with VVDI Key Tool Plus/VVDI2+VVDI Prog From ChinaOBD2 Official Blog
Please keep this link if you copy the post!