Skip to content
Menu
OBD2 Scanner Blog
  • Home
  • Car Diagnostic Tool
    • MB Star Diagnosis
    • BMW Diagnostic Tool
    • GM Tech2
    • Volvo Vocom Interface
  • OBD2 Code Scanner
    • VXDIAG
  • Tech Support
OBD2 Scanner Blog

Toyota Key Generation and Program with Launch X431 IMMO Plus/Elite

Posted on December 24, 2024 by VCDS

Confirmed! Launch X431 IMMO Plus/IMMO Elite can generate remote and add new key to Toyota no issues. It needs to work with X431 Key Programmer Remote Maker, and update the key programmer software first.

Car model:

Toyota Carmy 2018

Key type:

Mechanical key

How-to-do:

Connect Launch X431 Remote Maker, IMMO matching tool and vehicle properly

Toyota Key Generation and Program with Launch X431 IMMO Plus/Elite

First, go to Key Programmer>> Update to check if the software is the latest version. If not, update it.

Toyota Key Generation and Program with Launch X431 IMMO Plus/Elite

Then, put the original car key close to the X431 Key Programmer to read transponder

Identify the chip info successfully, remember the original car key chip model

Toyota Key Generation and Program with Launch X431 IMMO Plus/Elite Toyota Key Generation and Program with Launch X431 IMMO Plus/Elite

Next, still put the original car key next to the programmer

Detect the frequency successfully

Toyota Key Generation and Program with Launch X431 IMMO Plus/Elite

After that, select Vehicle Remote>> Asia>> Toyota>> Corolla>> Collora 12-17 ASK 314 Australia

Put the key into the coil of Launch X431 Key Programmer Remote Maker to generate remote

Burn successfully

Toyota Key Generation and Program with Launch X431 IMMO Plus/Elite Toyota Key Generation and Program with Launch X431 IMMO Plus/Elite

Finally, select IMMO>> Toyota>> Toyota Anti-theft diagnostic software>> Immonolizer/Keys Programming>> Vehicle mode>> Other region>> CARMY>> -2018.> > Mechanical key>> Type 5 (With G 72)>> Add Key

To clear or add other keys, one main key must be available.

Tips to identify main and sub keys:

After a key is inserted into the ignition switch, if the immobilizer lamp (security) is not on, the key is a main key. If the immobilizer lamp turns on for 1s and then turns off, the key is a sub key.图8-Toyota Key Generation and Program with Launch X431 IMMO Plus/Elite

Insert the matched main key, and turn on the ignition switch

Insert the key to be matched and keep ignition off. Wait for about 60s until the immobilizer lamp turns off, and then the matching is completed.

Back to last page, select Remote type 2>> Remote Control Matching

Toyota Key Generation and Program with Launch X431 IMMO Plus/Elite Toyota Key Generation and Program with Launch X431 IMMO Plus/Elite

Turn on ignition switch and open driver side door

Simutaneously press lock and unlock button for 4 seconds, then press unlock button for 1 second.

Result: the Toyota mechanical key is added successfully with Launch X431 diagnostic tool and X-431 Key Programmer.

Toyota Key Generation and Program with Launch X431 IMMO Plus/Elite

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

This Post: Toyota Key Generation and Program with Launch X431 IMMO Plus/Elite From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Post navigation

Prev: Prev: Renault Espace EDC16CP33 DPF, EGR OFF, Checksum OK with Foxflash
Next: Next: Kess V3 Remap Peugeot 208 and Citroen C1/C3 Valeo V56 via OBD

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Recent Posts

  • Caterpillar C9 Engine Coolant Level Signal Invalid Fault Code 12 111-2
  • chinaobd2.com Spring Festival Sale: Global Save Up to 50%
  • Allison 3000 & 4000 Gen5 Fault Code P070C Transmission Fluid Level Sensor Circuit Low
  • Allison 3000 & 4000 Gen5 Fault Code P070C Transmission Fluid Level Sensor Circuit Low
  • Doosan Machine Fault Code P060B ADC Test Error Solution

Recommend OBD2 Scanner

ME9.7 ECU Engine Computer ME9.7 ECU Engine Computer TabScan T6PT3G Diagnosis VCI for Porsche Diagnostic Tool Porsche Diagnostic Tool

Recent Comments

  • amr on MAN EOL Flash File Editor + MAN Immo Calculator Free Download
  • Pasquale Greenwald on Jungheinrich ETM/V 10-12 Tightening Torque for Screwed Connection on Brake Systems
  • VCDS on Scania SDP3 2.53.1 Diagnosis & Programming Free Download
  • Crossley on What are the functions of Iprog+ Programmer?
  • Lukas on VAG EDC15 EDC16 IMMO OFF Software Free Download

Archives

Categories

  • BMW Diagnostic Tool
  • Car Diagnostic Tool
  • Key Cutting Machine
  • Key Programming Tool
  • MB Star Diagnosis
  • OBD2 Code Scanner
  • Tech Support
  • VXDIAG

Tags

adapter Auto Pick and Decoder Car Key Copy Car Key Programmer cat Code Reader diagnostic software ECU Chip Tunning ecu programmer Ford gm handy baby Handy Baby 2 Key Programmer Handy Baby II Key Programmer HEX V2 immo iprog key Key Pro key programmer laptop Launch lish LISHI new arrivals nexiq nexiq link diesel truck interface nexiq truck diagnostic NEXIQ USB Link OBD2 obdii original program Scania VCI smart VAG COM Cable VCDS VCDS Cable VCDS VAG COM Cable vci VW wholesale X-PROG Box X-PROG Box ECU Programmer XPROG-M

Hot Selling

  • ME 9.7 ECU Engine Computer
  • MINI VCI J2534
  • NCF29XX Programmer
  • ThinkTool Pros+

Links

  • China OBD2
  • EPS Foam Machine
  • pcb assembly
©2025 OBD2 Scanner Blog | Powered by Superb Themes