Super ICOM Pro N3+ Tutorials: JLR Diagnosis For 2006 Land Rover L319

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

Super ICOM Pro N3+ can use the J2534 protocol to read through after switching with one key. It is compatible with the 6-pin and 14-pin CAN communication and the 7-pin K-line communication of the OBD port. It can use Volkswagen, Mercedes-Benz, Toyota, Honda, Land Rover and other special inspection software with J2534 interface.

Here is the Tutorials: Super ICOM Pro N3+  work with JLR SDD V164 special test software to diagnose 2006 Land Rover L319 (LR3/LR4) 406 PN- V6 4.0 Petrol.

Detailed operation steps:

Free download JLR SDD V164: SDD 164.00.001.Full.exe

Free download: N3+ J2534 driver

Open JLR SDD software, install the J2534 driver, select the PassThru menu in the special test software, select the ISO J2534 device from the list, plug in the USB cable between the computer and N3+, long press the N3+ switch button for 3S, and the N3+ host wired and wireless indicator will flash. Connect to a network to test normally.

Run JLR SDD software on the desktop

Pay attention to the warning and click “Continue”

Make sure the device connection is normal, and turn the ignition ON

Enter the VIN manually, and click “Identify Vehicle”

When it shows restore session info, click “Start New Session”.

Select high line instrument cluster, and click “Save” to save the changes.

Confirm the vehicle info, and click “Diagnosis” to choose the session type

Select symptom: Powertrain>> Engine system>> Starting system/Fuel vapour and odour/ Fuel tank>> Incorrect fuel

Then click “Continue”

Select “PCM” and DTC option to view DTCs for this module

Select the vehicle market specification depending on the car

Here we select France, and then click “Save”

The DTCs show in the list.

This Post: Super ICOM Pro N3+ Tutorials: JLR Diagnosis For 2006 Land Rover L319 From ChinaOBD2 Official Blog
Please keep this link if you copy the post!