Skip to content
Menu
OBD2 Scanner Blog
  • Home
  • Car Diagnostic Tool
    • MB Star Diagnosis
    • BMW Diagnostic Tool
    • GM Tech2
    • Volvo Vocom Interface
  • OBD2 Code Scanner
    • VXDIAG
  • Tech Support
OBD2 Scanner Blog

(Solved) MB SD Star C4/C5 WiFi NO Setup Required Cant Connect

Posted on December 9, 2024December 9, 2024 by VCDS

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

(Solved) MB SD Star C4/C5 WiFi NO Setup Required Cant Connect

MB SD Connect Compact DOIP C4 mb star c4 or c5 support reading out & erasing trouble code,reading the real-time data of sensor and actuator, coding and programming. Also support wireless diagnose, support K line,CAN BUS and UDS protocol, with multi-language.

 

Issues :

I need to connect via WiFi, not via cable ,do you think that if it were to connect via WiFi, I would still bother you with something?

(Solved) MB SD Star C4/C5 WiFi NO Setup Required Cant Connect

from the above picture it clearly shows the cable setting, I need the WiFi status

Solution :

Let C4 connect the car directly , power to C4, and then search for WIFI in the computer (note that C4 wants to connect to WIFI, the computer can only connect to the network cable), there is a name is C4 PLUS WIFI, password is 123456789

Customer :

that’s exactly the problem, the program doesn’t let me enter the system to do these codes, I’ve seen and I know exactly what I have to do, but your program doesn’t let me do these settings, so please ask the engineer to between the dance to make the correct settings

(Solved) MB SD Star C4/C5 WiFi NO Setup Required Cant Connect

from here it won’t let me log in

Answer :

If so , please check the video how to setting the wifi from this link :

https://mega.nz/file/hD4TUbqL#6EoBRT_rJljqK0HANg7nmX8atlxW8nhV3RtlB2VegOk

Customer :

Oh good , I solved it thanks to your video! have a nice day and I apologize for all the trouble!

More request for any automotive diagnostic tools , welcome to contact us any time

www.chinaobd2.com

 

Related posts:

How to Use Vediamo to Active Daylight for Mercedes Benz W204
MB SD C4 Plus Connection Error “Verify the battery” Solution
Benz 722.9 7G gearbox SCN coding SD connect C4 done
FAQs for MB SD Connect C4 Star Diagnostic Tool

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

This Post: (Solved) MB SD Star C4/C5 WiFi NO Setup Required Cant Connect From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Tags: MB SD C4 mb star Mercedes Benz program WiFi wireless

Post navigation

Prev: Prev: How to Use an Automotive Diagnostic Tool
Next: Next: Caterpillar C9 Hassle Code 00 231-12 ECM J1939 Machine Not Responding

Related Posts

How to Change Speed Limit for Volvo Truck by Volvo PTT

How to Change Speed Limit for Volvo Truck by Volvo PTT

2020.08.5

CG Pro 9S12 Read BMW CAS4 Data without Removing Components

CG Pro 9S12 Read BMW CAS4 Data without Removing Components

2020.05.7

How to Reset VW Steering Assist 1S1909144P with OBDSTAR X300 DP?

How to Reset VW Steering Assist 1S1909144P with OBDSTAR X300 DP?

2019.03.6

How to Use Autek iKey820 Program Keys for Dodge RAM 2009

How to Use Autek iKey820 Program Keys for Dodge RAM 2009

2023.06.10

Launch X431 Perform ECU Coding for VW Models

Launch X431 Perform ECU Coding for VW Models

2019.03.8

How to Use ECUsafe EGR/DPF/FAP Removal Software

How to Use ECUsafe EGR/DPF/FAP Removal Software

2019.02.24

How to Use Vediamo to Activate Remaining Fuel Liters for Benz

How to Use Vediamo to Activate Remaining Fuel Liters for Benz

2020.05.28

FUSO Truck Engine ECU Reprogramming by Xentry

FUSO Truck Engine ECU Reprogramming by Xentry

2023.05.10

Volvo PTT Do Cruise Control Parameter Programming for Mack I II III

Volvo PTT Do Cruise Control Parameter Programming for Mack I II III

2019.03.2

MB-PRO IR Code Reader For Mercedes Benz

MB-PRO IR Code Reader For Mercedes Benz

2018.12.17

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Recent Posts

  • BMW G Series BDC2 Module Virgin and Replacement by APPRO2
  • CG FC200 V1.2.9.2 Update: BMW Coolant Temperature Setting Added
  • Scania Truck ALM 000463 Motion and Inclination Detector,Calibration Fault
  • How to Solve JCB Excavator P0615-13 Starter Relay Open Circuit Error
  • ECUDESK Software Latest ECU Support List (2025.05)

Recommend OBD2 Scanner

ME9.7 ECU Engine Computer ME9.7 ECU Engine ComputerTabScan T6PT3G Diagnosis VCI for Porsche Diagnostic Tool Porsche Diagnostic Tool

Recent Comments

  • amr on MAN EOL Flash File Editor + MAN Immo Calculator Free Download
  • Pasquale Greenwald on Jungheinrich ETM/V 10-12 Tightening Torque for Screwed Connection on Brake Systems
  • VCDS on Scania SDP3 2.53.1 Diagnosis & Programming Free Download
  • Crossley on What are the functions of Iprog+ Programmer?
  • Lukas on VAG EDC15 EDC16 IMMO OFF Software Free Download

Archives

Categories

  • BMW Diagnostic Tool
  • Car Diagnostic Tool
  • Key Cutting Machine
  • Key Programming Tool
  • MB Star Diagnosis
  • OBD2 Code Scanner
  • Tech Support
  • VXDIAG

Tags

adapter Auto Pick and Decoder Car Key Copy Car Key Programmer cat Code Reader diagnostic software ECU Chip Tunning ecu programmer Ford gm handy baby Handy Baby 2 Key Programmer Handy Baby II Key Programmer HEX V2 immo iprog key Key Pro key programmer laptop Launch lish LISHI new arrivals nexiq nexiq link diesel truck interface nexiq truck diagnostic NEXIQ USB Link OBD2 obdii original program Scania VCI smart VAG COM Cable VCDS VCDS Cable VCDS VAG COM Cable vci VW wholesale X-PROG Box X-PROG Box ECU Programmer XPROG-M

Hot Selling

  • ME 9.7 ECU Engine Computer
  • MINI VCI J2534
  • NCF29XX Programmer
  • ThinkTool Pros+

Links

  • China OBD2
  • EPS Foam Machine
  • Foxdiag
  • Сканер OBD2
©2025 OBD2 Scanner Blog | Powered by chinaobd2