Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
SmartPRO 5000U-PLUS 5000u Plus Universal USB Programmer is a perfect Programmer for PCF29xx chips.
Top 3 Reasons To Get SmartPRO 5000U-PLUS Programmer
1. Patented I / O port drive technology, eliminate IC programming burning
Due to universal programmers are requires compatible chips, the requirements for the programming I / O port has been raised to a high level.Brand-new I / O port drive technology enables each I / O port of the universal programmer to pass high-speed signals, suppress overshoot brought by the high-speed signal, protect over-current, provide adequate and sustained output current, bear bus collision and has the ability of quickly recovering from conflict status.
2. ICP online programming, makes it easier to use and more flexible
Separate ICP download line interface is able to program chips on the circuit board online. While the offline programming mode ICP, without connecting to a computer, users only need to get the data stored in the built-in DOM. With few ICP scattered lines, it is potable for the spot debugging or a program upgrade.
3. Massive IC support, provides timely timing upgrade
The SmartPRO 5000U-PLUS programmer is now compatible with various types of MCU / Flash / CPLD / FPGA chips, etc relies on good relationships with the major manufacturers. It also provides a variety of new chips programming ability accurately and timely which will satisfy our customers’ needs to greatest extent.
SmartPRO 5000U-PLUS 5000u Plus Universal USB Programmer PCF29XX chips Support list:
PCF7922@ICPLine
PCF7922@TSSOP20
PCF7926@ICPLine
PCF7926@TSSOP20
PCF7945@ICPLine
PCF7945@TSSOP28
PCF7945@TSSOP28(New)
PCF7953@ICPLine
PCF7953@TSSOP28
PCF7953@TSSOP28I(New)
PCF7961@ICPLine
PCF7961@TSSOP20
PCF29XX Chips is widely used for car keyless go product, Smartpro 5000u-plus is the best tool for the programmer of PCF29xx.
more information about SmartPRO 5000u-plus Programmer,
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Tags: cat key pcf program smart SmartPRO SmartPRO 5000U-PLUS Programmer Universal USB Programmer USB Programmer wholesale
Related Posts
JDiag JD301 OBD2 Scanner Automotive Engine Fault Code Reader CAN Diagnostic Scan...
2018.12.17
How to Renew Rear Oil Seals for Perkins 1000 Series Engine
2023.04.3
Program Range Rover 2019 Universal key with Lonsdor or Autel or ACDP?
2023.04.13
2023 2018 Scania Multi EPC Parts Catalogue Free Download
2023.06.14
XPROG V6.12 vs. XPROG V5.84: adds new adapters / authorization, new PCB
2019.12.13
Mercedes Increased Speed Steps with Autel MaxiSys Pro MS908P MS908SP
2024.01.28
BMW Carly Disable Headlight Bulbs Flickering
2019.02.24
For MAN Diagnostic Tool MAN CAT T200
2018.12.17
Bosch ADS625 Read & Clear DTCs for Volkswagen Passet GLS 2004
2019.07.19
How to Remove and Install Engine Oil Cooler for Perkins 400A/400D Engine
2025.01.13