Topic:
Which tool can clone Renault Siemens SIRIUS 32 ECU?
Uobdii.com engineer’s suggestion:
It’s recommended to use the original ECU programmer like OBDSTAR DC706, Foxflash, Alientech Kess3. All can read, write this Renault ECU model.
1.By OBDSTAR DC706 ECU Tool:
Read &write EXT flash & EEPROM, IMMO OFF, OBD and Bench are OK
Bench mode:
Renault Siemens SIRIUS 32 Pinout diagram to DC706:
A-Pin 29, 30= Red 12V (16)
A-Pin 28= Black GND (4+5)
A-Pin 56= Blue K LINE (7)
A-Pin 26= Purple GMS CAN (1)
Menu function path:
ECU Flasher>> ECM>> ECM V30.48 (choose the newest software version)>> BRAND>> Renault>> Renault Siemens SIRIUS 32 AM29F200BB (OBD/Bench)
Accessories required:
OBDSTAR P004 ECU Clone Jumper and Adapter, main cable (OBD cable), and 12V2A charger
Follow the Pinout to connect device and ECM correctly
Keep DC706 charging and communicating throughout the whole progress, and make sure the network connection is stable as well.
Select “Bench” mode to perform the read and write operations.
OBDSATR DC706 Renault ECM V30.48 Support List:
| Brand | ECU brand | Type | Dump | R&W INT flash | R&W INT EEPROM | R&W EXT flash | R&W
EXT EEPROM |
Other | COMM. MODE |
| RENAULT | BOSCH | EDC16C41 | MPC561(2) | √ | √ | BENCH | |||
| RENAULT | BOSCH | EDC17C42 | TC1767 | √ | √ | BENCH | |||
| RENAULT | BOSCH | ME17.9.23 | TC1724N | √ | √ | Modify VIN Reset (Virgin) |
BENCH | ||
| RENAULT | CONTINENTAL | EMS3110 | TC1766 | √ | √ | BOOT | |||
| RENAULT | SIEMENS | EMS3132 | AM29F200BB | √ | √ | IMMO OFF | OBD/BENCH | ||
| RENAULT | SIEMENS | EMS3134 | AM29F400BB | √ | √ | IMMO OFF | BENCH | ||
| RENAULT | SIEMENS | SIRIUS 31H | AM29F200BB | √ | √ | IMMO OFF | OBD/BENCH | ||
| RENAULT | SIEMENS | SIRIUS 32 | AM29F200BB | √ | √ | IMMO OFF | OBD/BENCH | ||
| RENAULT | SIEMENS | SIRIUS 32N | AM29F200BB | √ | √ | IMMO OFF | OBD/BENCH | ||
| RENAULT | SIEMENS | SIRIUS 34 | AM29F400BB | √ | √ | IMMO OFF | BENCH | ||
| RENAULT | SIEMENS/CONTINENTAL | SIM32 | 64F7055+95160 | √ | √ | BENCH |
2.By Foxflash ECU Programmer:
Bench ok, boot mode not ok
1.Connect with boot mode following the pinout of manual with no success.
2.Manual enable boot mode and can read flash 29f200 but fail to write
3.Connect ecu with pinout of ktag plus add a +12v supply to acc2 ecu pin and can read and write ecu perfectly used Full system only bench.
Bench mode
Read flash ok
Write flash ok
Immo off ok
Bench Pinout
3.By Kess V3
Most Renault Siemens SIRIUS 32 ECUs can be cloned by Kess3 via OBD and Boot modes.
Currently, Thalia, Clio RS (2nd) (2003), and Clio RS (2nd) (2004) support OBD mode only.
KESS3 Vehicle List Download
The related Pinout diagram and manual can be found in the Alientech suite software.
Other ECU programmers like galletto v54 and ktag also can read, write and do immo off for Renault Siemens SIRIUS 32. Try at your own risk!
www.chinaobd2.com
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!