ELV AUDI MC68H908GR16 mcu read by Xprog or VVDI Prog, which is faster?
1)Read 908GR16 with Xprog
Require xprog version newer than 5.70 (Xprog v5.70, 5.74, 5.84)
Connect ELV 908GR16 mcu with Xprog via HC(S)12 BDM adapter
In Xprog-m software, select Freescale MCU MC68H908GR16_FLASH+ security
select Read Security Bytes
Bypass security
Xprog m read security byte success, press OK to continue
Go to Options tab->Environment->Device->Manual
Manully enter security bytes
Read 908GR16 in process
Verify device
Read data success
Save data.
Reading procedure takes 1 minute and 59 seconds
2) Read 908GR16 with Xhorse VVDI Prog
Follow wiring diagram to connect VVDI prog with ESL
In VVDIProg software, select Audi ESL HC08GR16 V1
Read data
Verify data
Save data
Reading process takes 2 minutes.
In conclusion:
Xprog is cheaper and faster than VVDIProg in Audi ELV 908GR16 reading.
This post is from China OBD2, Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!