Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
Xhorse BMW-G BDC2 Adapter is compatible with VVDI Key Tool Plus PAD, VVDI2 and MIDI Advanced Version to add new key to G Series BDC2 on bench. Follow the three tips below for smoother, safer operation with your adapter!
Tip 1:
Use an anti-static wristband to prevent static damage to the BDC module.
Tip 2:
Ensure the pins align with the positioning points.
Focus on checking the EEPROM PIN2 pin, ensuring proper contact with the probe and that it doesn’t touch other pins.
Tip 3:
Provide 12V power to the adapter.
If the voltage is too high or too low, the adapter’s light may flicker or not turn on.
Too high voltage can even damage the adapter.
Read also:
Xhorse VVDI2 and BDC2 Adapter Add BMW G Series Key
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Handy Baby 2 II Key Programmer Hand-held Car Key Copy Key Programmer for 4D/46/48 ChipsNote: Language: English, SpanishThis Device can't work together Read more
Renault CAN Clip V175 and Consult 3 III For Nissan Professional Diagnostic Tool 2 in 1 Descriptions of Consult 3 Read more
Super VAG K+CAN V4.6 Top 3 Reasons To Get Super VAG: Software Version: V4.6Supported Languages: English/ Spanish/ Italian/ Portuguese/ GreekUDS Protocol Read more
CHIP PROGRAMMER SOCKET SSOP34 This is the SSOP34 socket adapter for chip programmer. Package including: 1pc x CHIP PROGRAMMER SOCKET Read more
Please keep this link if you copy the post!