PSA Interface Checker Download,Installation,How to Use and Feedback

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

PSA Interface Checker Free Download

Interface Checker and driver

http://depositfiles.com/files/yiokrtfjz

 

Driver install DiagBox

http://depositfiles.com/files/7a3cy0a0r

 

Download The Txt File from

Depositfiles

http://depositfiles.com/files/l2u92mu59

or

Rapidshare

https://rapidshare.com/files/4023691405/Rar Code.txt

https://rapidshare.com/files/3616630225/PSA_Interface_Checker_V2.9.rar

 

Mega download link:

https://mega.nz/file/jVVQSYLQ#AOadR15rv3eR8CL9Xaim7rvKVmfid-WBKL8lNvmbIy8

 

PSA Interface Checker Installation:

Just double click PSA interface Checker to install with default option.

 

 

How to Use PSA Interface Checker?

this is the instruction to reflash your lexia interface:
(1) install the [ PSA Interface Checker Install.exe ] , after installation you will get 3 new shortcuts on desktop
(2) connect your lexia interface to your computer by USB cable , no need to connect to car, install the driver for the interface automatically
(3) run the [ PSA Interface Checker ] from desktop, click ACTIVATE,
(4) click Version of the selected file (APPLI.com), select vci_updater.com file, click Download the Flash App, wait for a few seconds untill the flash is done (when the flash is done successfully, the greem light/LED on your lexia interface will keep flashing )
*** This step is for reflashing which will change the serial number of your lexia interface from Revision B to Revision C also with the original Evolution Driver !
*** If the reflashing procedure only takes 1 second in your side , usually that means the

reflashing fails, you need to make a special handling as follows:
1) copy the vci_updater.com file and appli.com file to MajAppCom folder located in C:\APPLIC\LEXIA\MajAppCom
2) do the step 4 again and select vci_updater.com file and appli.com file from the MajAppCom folder located in
C:\APPLIC\LEXIA\MajAppCom

 

PSA Interface Checker Feedbacks:

Feedback 1:

It will works with both
The only thing that you have to do when you want to use Lexia/PP2000 the old platforme is to downgrade the firmware to 4.2.2
When you

This Post: PSA Interface Checker Download,Installation,How to Use and Feedback From ChinaOBD2 Official Blog
Please keep this link if you copy the post!