Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

Autel MaxiIM IM508 Key Programmer (In 2022 we recommend Autel IM508 + XP400 Pro) is able to program 2020-2022 Hyundai i10 ID4A all keys lost by OBD with free pin code. Follow the steps below to learn how to do.
Connect Autel IM508 to OBD,
IMMO >> Hyundai >> Manual selection >> Europe >> I10(AC3) >> 2020- >> Smart key >> Yes >> Immo status scan >> Read PIN >> Read pin code(4A smart card)
This function only supports models with 4A chip type smart card. Please ensure the key type is correct!
Press the START button, turn the Hazard warning light on.
Password was read out: 439476.
All keys lost(guided) >> Start
This function supports add key and all key lost;
Performing this function will erase all existing keys, all the old keys must be relearned again to be able to use normally. Press
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Tags: Autel key key chip Key Pro program smart smart card
Related Posts

What is j2534 pass thru?
2019.06.3

Iprog+ Programmer Full Iprog+ Odometer Correction Support IMMO + Mileage Correct...
2019.04.26

SDconnect C4 Suddenly NOT Worked Solution
2019.12.26

How to Delete FSC for BMW CIC Unit by ENET Cable
2023.04.4

What’s New in Xprog M V5.84 Box Programmer?
2019.03.1

ODIS-S 5.0.4 ODIS-E 9.0.4 Download + How to Install (FAQs)
2019.03.8

SVCI 2020 (FVDI) abrites commander software Free download
2019.12.20

How to Add New Keys for Dodge and Chrysler by Yourself (No Need Tool)
2019.02.24

OPCOM Program Immobilizer I II Keys for Opel Guide
2019.06.17

FCOM Key On Engine Off KOEO Test for Ford Ka 1999
2019.07.17