PADFlash Read and Write VW Polo DCM6.2V via OBD VR OK

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

Padflash ECU Programmer user feedback:

Successfully tested on VW Polo with Delphi DCM6.2V ECU via OBD

Model: VW Polo (5th) 2009–2017
ECU: 1.4 TDI 75/90/105HP Delphi DCM6.2V (CAN BUS)
Operation Mode: OBD Virtual Read (VR)
Read/Write: OK
Checksum Correction: Successful

www.chinaobd2.com

This Post: PADFlash Read and Write VW Polo DCM6.2V via OBD VR OK From ChinaOBD2 Official Blog
Please keep this link if you copy the post!