Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
It has been tested and confirmed that Padflash ECU programmer can read and write MAN truck Bosch EDC7C32+ MPC561 via OBD successfully.
Operation guide:
1.Connect PADFlash and Computer
Connect the PADFlash ECU Tool and one computer (installed Windows 7 or Windows 10, 64-bit) using the USB cable
Insert the USB Key that comes with the device into the computer.
Ensure the network connection is stable.
2.Select the Corresponding ECU Model
Open the PADFlash Updater Manager on the computer
Select DAF>> CF75>> Cummins Bosch EDC7C3
Connect PADFlash and MAN truck via OBD cable correctly, need to use the stand adapter
3.Read ECU data
Click “ECU data” to read the original data
4.Read file
Click “Read file” to read the file and save it, then turn the ignition off
5.Open file
Select the desired file to write
6.Write file
Click “Write File/Recovery” to write the file
END!
Padflash ECU tool also successfully read and write Mercedes-Benz CRD3.10 ECU via OBD and bench.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!