Skip to content
Menu
OBD2 Scanner Blog
  • Home
  • Car Diagnostic Tool
    • MB Star Diagnosis
    • BMW Diagnostic Tool
    • GM Tech2
    • Volvo Vocom Interface
  • OBD2 Code Scanner
    • VXDIAG
  • Tech Support
OBD2 Scanner Blog

OBDSTAR X300 Classic G3 Program Mercedes-Benz FBS3 W169 BE Key via OBD

Posted on December 24, 2024December 24, 2024 by VCDS

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

It has been tested and verified by OBDSTAR Tech that OBDSTAR X300 Classic G3 Key Programmer with Mercedes-Benz FBS3 Kit and MP001 Programmer can program keys to Mercedes-Benz FBS3 W169 via OBD perfectly.

Currently, only the following Benz FBS3 W Chassis models are supported in the Benz software on X300 Classic G3 (updated on October 24th, 2024). Others like C216, C117, CL203, C219, C218, C207, X164, X156, X204, R230, R171, R172, R197, etc will be updated in the later version.

BRAND MODEL CHASSIS YEAR
BENZ A-CLASS W169 2004-2012
B-CLASS W246 2012-2015
C-CLASS W204 2007-2014
C-CLASS W209 2004-2007
C-CLASS W203 2004-2007
CL-CLASS W216 2006-2013
CL-CLASS W215 1999-2006
CLK-CLASS W209 2002-2007
CLS-CLASS W218 2011-2017
CLS-CLASS W207 2009-2013
CLS-CLASS W210 1996-2002
E-CLASS W212 2008-2014
E-CLASS W211 2002-2007
G-CLASS W463 2012-2015
G-CLASS W463 2006-2010
GL-CLASS W166 2012-2015
GL-CLASS W164 2005-2010
GLK-CLASS W204 2008-2014
GLK-CLASS W208 1997-2002
GLS-CLASS W166 2015-
ML-CLASS W166 2012-2015
ML-CLASS W164 2005-2010
S-CLASS W221 2006-2011
S-CLASS W220 1998-2004
SLC-CLASS W197 2014-
SLK-CLASS W172 2012-2015
SLS-CLASS W197 2007-2014

OBDSTAR X300 Classic G3 Program Mercedes-Benz FBS3 W169 BE Key via OBD

OBDSTAR G3 and Benz FBS3 Kit program Benz FBS3 W169 Key guide:

Two methods to select the car model:

Way 1: select by model or by Chassis.

Select A Class>> 2004-2012>> by Car

Way 2: Auto detect it or use the W169

If press Auto detect just use the original key to turn on the ignition

OBDSTAR X300 Classic G3 Program Mercedes-Benz FBS3 W169 BE Key via OBD OBDSTAR X300 Classic G3 Program Mercedes-Benz FBS3 W169 BE Key via OBD

Connect the OBDSTAR G3 Key Programmer with the OBDSTAR MP001 programmer and OBDSTAR Benz FBS3 Kit

OBDSTAR X300 Classic G3 Program Mercedes-Benz FBS3 W169 BE Key via OBD

Auto detect the EIS type is W169

Press “Yes” to next page

OBDSTAR X300 Classic G3 Program Mercedes-Benz FBS3 W169 BE Key via OBD

You can see the functions incl. Add Keys, All Keys Lost, and ECU Reset Virgin/Program.

1.Read PinCode

Calculate PinCode (By Work Key)
Calculate PinCode (AKL)
Read BE Key PinCode

2.ECU Reset Virgin/Program

EIS
ECM
TCM
ISM
ELV

3.Program Keys

Read Key’s Data
Generate Key File
Erase BE Key
Write BE Key

OBDSTAR X300 Classic G3 Program Mercedes-Benz FBS3 W169 BE Key via OBD

Select “Add Keys”, and you can see the step-by-step guide.

Step 1: Read PinCode

Step 2: Generate BE Key File

Step 3: Reset Virgin BE Key Data

Step 4: Read Key Info

Step 5: Write BE Key Data

Step 6: Examine Car Key

Click “Guide” to check the operation steps and how to connect the actual device correctly.

OBDSTAR X300 Classic G3 Program Mercedes-Benz FBS3 W169 BE Key via OBD OBDSTAR X300 Classic G3 Program Mercedes-Benz FBS3 W169 BE Key via OBD

In detail…

Step 1: Read PinCode

Select Step 1: Read PinCode>> PinCode Collection

To perform this function, you need to connect to the server, and connect the C4-04 module of OBDSTAR FBS3 Kit and X300 Classic G3 to the MP001, and then connect the other end to the vehicle’s OBD.

OBDSTAR X300 Classic G3 Program Mercedes-Benz FBS3 W169 BE Key via OBD

Insert and remove the ignition key from the EIS 3 times, then insert it into the EIS

OBDSTAR X300 Classic G3 Program Mercedes-Benz FBS3 W169 BE Key via OBD

Follow the on-screen prompt to turn the ignition key to the ON position, and observe whether the dashboard lights up. If it cannot be turned to the ON position or the dashboard does not light up. Try repeatedly until it succeeds.

Reading the EIS key data…

Collecting data for PinCode calculations (package 1). This process will take 5-10 minutes, please keep patience.

Wait… calculating PinCode online, it will take 1 or 5 minutes…

Calculate the PinCode successfully

That is the key password for the vehicle.

OBDSTAR X300 Classic G3 Program Mercedes-Benz FBS3 W169 BE Key via OBD OBDSTAR X300 Classic G3 Program Mercedes-Benz FBS3 W169 BE Key via OBD

Step 2: Generate BE Key File

There are two methods.

Method 1: Read EIS IMMO Data

Method 2: Load EIS IMMO Data

OBDSTAR X300 Classic G3 Program Mercedes-Benz FBS3 W169 BE Key via OBD

Here select the method 1 to operate via OBD.

Read EIS IMMO data successfully, you can see the special key, PinCode, EIS track info, and EIS basic info.

Press “Generate Key File”, you see the key1 and key2 have got keys, so you can select other key position to operate (e.g. Key 4), press “OK” to generate the key file.

Key file generation is successful.

Take the key out of the ignition as well and before do any other programming. Ensure that the vehicle still starts. The vehicle still starts no warning lights on the dashboard and you can hear the ignition lot going every time so we know everything’s good.

OBDSTAR X300 Classic G3 Program Mercedes-Benz FBS3 W169 BE Key via OBD OBDSTAR X300 Classic G3 Program Mercedes-Benz FBS3 W169 BE Key via OBD OBDSTAR X300 Classic G3 Program Mercedes-Benz FBS3 W169 BE Key via OBD

Step 3: Reset Virgin Be Key Data

If you’ve bought an aftermarket key or you bought a key and it’s already got key data on there. This is so it resets the key that you’re using.

Insert the key into the infrared Keyhole. Putting new key inside here, and reset the key.

Reset version successfully.

OBDSTAR X300 Classic G3 Program Mercedes-Benz FBS3 W169 BE Key via OBD

Step 4: Read Key Info

It will read the key info reading reset the new key. It was already virginized but obviously it’s just good practice to read key info again.

OBDSTAR X300 Classic G3 Program Mercedes-Benz FBS3 W169 BE Key via OBD

Step 5: Write BE Key Data

Then it will write the data that it’s made that it’s created from the vehicle.

Insert the blank key. Select key file generated in Step 2.

Write key file. This is now writing the data onto the key.

Write key file successfully. Insert the key into the EIS and check if the key can start vehicle and if the remote functions are working properly.

OBDSTAR X300 Classic G3 Program Mercedes-Benz FBS3 W169 BE Key via OBD OBDSTAR X300 Classic G3 Program Mercedes-Benz FBS3 W169 BE Key via OBD OBDSTAR X300 Classic G3 Program Mercedes-Benz FBS3 W169 BE Key via OBD

Step 6: Examine Car Key

After did all above steps, we need to check if the car key can be used normally.

Just put it onto the key and once put that onto the successful key insert the key and check if it can start.

Done!

The operation guide applies to other Mercedes-Benz FBS3 car models supported by X300 Classic G3 key programmer and FBS3 Kit.

www.chinaobd2.com

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

This Post: OBDSTAR X300 Classic G3 Program Mercedes-Benz FBS3 W169 BE Key via OBD From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Tags: key Key Pro key programmer original program

Post navigation

Prev: Prev: Autel Unlock SFD Security Gateway for VAG Guide
Next: Next: CG FC-200 V1.2.3.0 Update and Download

Related Posts

Suzuki Worldwide Automotive EPC Free Download

Suzuki Worldwide Automotive EPC Free Download

2019.07.19

Zabid Recruitment Agent for Original Handy Baby 2 II Key Programmer Agent Price:US$416.00

Zabid Recruitment Agent for Original Handy Baby 2 II Key Programmer Agent Price:...

2019.02.17

How to Use Cat ET and Cat 478-0235 Adapter 3 to Do ECM Clearing for Caterpillar

How to Use Cat ET and Cat 478-0235 Adapter 3 to Do ECM Clearing for Caterpillar

2024.01.24

Cradock Recruitment Agent for Original Handy Baby 2 II Key Programmer Agent Price:US$418.00

Cradock Recruitment Agent for Original Handy Baby 2 II Key Programmer Agent Pric...

2019.02.17

Mitsubishi Lancer ECU Reprogramming by MUT-III Diagnostics

Mitsubishi Lancer ECU Reprogramming by MUT-III Diagnostics

2023.04.4

Only US$466.00 Original Handy Baby 2 II Key Programmer for Fiji Customers Valid untill 2019/2/17

Only US$466.00 Original Handy Baby 2 II Key Programmer for Fiji Customers Valid ...

2019.02.16

ECUHELP KT200 BOSCH MD1CS018 pinout and video

ECUHELP KT200 BOSCH MD1CS018 pinout and video

2023.04.13

BMW E60 CIC Video in Motion Coding by Expert & NCSdummy

BMW E60 CIC Video in Motion Coding by Expert & NCSdummy

2019.06.17

(Solved) Lonsdor K518ise cannot read PIN code from Grand Cherokee 2014

(Solved) Lonsdor K518ise cannot read PIN code from Grand Cherokee 2014

2019.02.28

Only US$467.00 Original Handy Baby 2 II Key Programmer for Venezuela Customers Valid untill 2019/2/17

Only US$467.00 Original Handy Baby 2 II Key Programmer for Venezuela Customers V...

2019.02.16

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Recent Posts

  • Yanhua Module 38 Update BMW BDC2 Reflash and Replace Functions
  • Vapon Update BDC2 IMMO Module Data Erase
  • How to Replace U17 and L8 Components for OBDSTAR G3 Startup Failure?
  • Alientech Kess3 Adds Master TCU OBD-Bench-Boot Protocol
  • Scania Truck ALM Alarm System ALM404 Fault in the CAN Communication Solution

Recommend OBD2 Scanner

ME9.7 ECU Engine Computer ME9.7 ECU Engine Computer TabScan T6PT3G Diagnosis VCI for Porsche Diagnostic Tool Porsche Diagnostic Tool

Recent Comments

  • amr on MAN EOL Flash File Editor + MAN Immo Calculator Free Download
  • Pasquale Greenwald on Jungheinrich ETM/V 10-12 Tightening Torque for Screwed Connection on Brake Systems
  • VCDS on Scania SDP3 2.53.1 Diagnosis & Programming Free Download
  • Crossley on What are the functions of Iprog+ Programmer?
  • Lukas on VAG EDC15 EDC16 IMMO OFF Software Free Download

Archives

Categories

  • BMW Diagnostic Tool
  • Car Diagnostic Tool
  • Key Cutting Machine
  • Key Programming Tool
  • MB Star Diagnosis
  • OBD2 Code Scanner
  • Tech Support
  • VXDIAG

Tags

adapter Auto Pick and Decoder Car Key Copy Car Key Programmer cat Code Reader diagnostic software ECU Chip Tunning ecu programmer Ford gm handy baby Handy Baby 2 Key Programmer Handy Baby II Key Programmer HEX V2 immo iprog key Key Pro key programmer laptop Launch lish LISHI new arrivals nexiq nexiq link diesel truck interface nexiq truck diagnostic NEXIQ USB Link OBD2 obdii original program Scania VCI smart VAG COM Cable VCDS VCDS Cable VCDS VAG COM Cable vci VW wholesale X-PROG Box X-PROG Box ECU Programmer XPROG-M

Hot Selling

  • ME 9.7 ECU Engine Computer
  • MINI VCI J2534
  • NCF29XX Programmer
  • ThinkTool Pros+

Links

  • China OBD2
  • EPS Foam Machine
  • Foxdiag
  • Сканер OBD2
©2025 OBD2 Scanner Blog | Powered by chinaobd2