Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
How to program 2023 CHANGAN UNI-V proximity key (all keys lost) by OBDSTAR X300 Classic G3 key programmer?
G3 can add keys with PinCode via OBD. Make sure the internet connection is normal during the process.
Here is the tutorial:
Connect X300 Classic G3 to the CHANGAN car via OBD cable
Tap [IMMO] on the main menu
There are two CHANGAN car options. The car icon in the lower left that has a lighting symbol indicates E-car. Choosing the car depends on your needs.
Then select CHANGAN V41.05>> Read PinCode>> TYPE 1 (CAN)
Turn on the ignition
Read out the Pincode. Take a screenshot of the Pincode for key programmer later.
Back to the last menu
Select Manual Select Model>> UNI-V>> PROXIMITY>> BCM>> All Keys Lost
Input the 4-digit Pincode
Follow the prompt to put the unlearned key into the car cup holder for learning properly. If the key is programmed successfully, you can hear a sound.
Done!
For more car models supported, download OBDSTAR X300 Classic G3 Vehicle Support List.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!