Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
OBDSTAR has officially released a major upgrade for the X300 Classic G3 and ODOMaster. The update added TOYOTA/LEXUS 2019- S6J3XX and 2021- R7F701401 dashboard mileage calibration. For some models, there’s no need to disassemble the dashboard. Just use the OBDSTAR TOYOTA-30 Cable for a convenient, plug-and-play solution.
Support Models:
| Brand | Model | Type |
| DAIHATSU | ROCKY | 2021 S6J3001 DENSO |
| LEXUS | ES | 2019– S6J3001 DENSO |
| GX550 | 2023– R7F701401 DENSO | |
| LM350H | R7F701401 DENSO | |
| LS | 2019– S6J3001 DENSO | |
| LS500 | 2023– R7F701401 DENSO | |
| LX600 | 2022– S6J3001 DENSO | |
| NX350 | R7F701401 DENSO | |
| RX350 | 2023– R7F701401 DENSO | |
| RX450H | 2023– R7F701401 DENSO | |
| RX500H | 2023– R7F701401 DENSO | |
| UX | 2018– S6J3001 DENSO | |
| TOYOTA | 4RUNNER | 2019– S6J3001 DENSO |
| ALLION | 2019– S6J3001 DENSO | |
| ALPHARD | 2023– R7F701401 DENSO | |
| AVALON | 2018– S6J3001 DENSO | |
| AVANZA | 2023 VELOZ Q S6J3001 DENSO | |
| BZ4X | 2023- R7F701401 DENSO | |
| CAMRY | 2024– R7F701401 DENSO(80) | |
| CAMRY | 2018– S6J3001 DENSO | |
| CH-R | 2018– S6J3001 DENSO | |
| COROLLA | 2023– R7F701401 DENSO | |
| COROLLA | 2018– S6J3001 DENSO | |
| COROLLA CROSS | 2023– R7F701401 DENSO | |
| COROLLA CROSS | 2021– S6J3001 DENSO | |
| CROWN | 2024– R7F701401 DENSO | |
| CROWN KLUGER | 2018– S6J3001 DENSO | |
| GRANACE | 2019– S6J3001 DENSO | |
| GRANVIA | S6J3001 DENSO | |
| HARRIER | 2020– R7F701401 DENSO | |
| HARRIER | 2016– S6J3001 DENSO | |
| HIACE | 2019– S6J3001 DENSO | |
| HIGHLANDER | 2023– R7F701401 DENSO(70) | |
| HIGHLANDER | 2018– S6J3001 DENSO | |
| KLUGER | 2018– S6J3001 DENSO | |
| LEVIN | 2024– R7F701401 DENSO | |
| LEVIN | 2019– S6J3001 DENSO | |
| LINSHANG | 2024– R7F701401 DENSO | |
| RAIZE | 2023– S6J3001 DENSO | |
| RAV4 | 2023– R7F701401 DENSO | |
| RAV4 | 2019– S6J3001 DENSO | |
| SIENNA | 2019– S6J3001 DENSO | |
| TACOMA | 2018– S6J3001 DENSO | |
| TACOMA IV | 2023– R7F701401 DENSO | |
| TUNDRA | 2022– R7F701401 DENSO | |
| VELLFIRE III | 2023– R7F701401 DENSO | |
| VENZA | 2019– S6J3001 DENSO | |
| VIOS | 2023– S6J3001 DENSO | |
| WILDLANDER | 2020– R7F701401 DENSO | |
| WILDLANDER | 2019– S6J3001 DENSO | |
| YARIS CROSS | 2019– S6J3001 DENSO | |
| YARIS IV | 2019– S6J3001 DENSO |
OBDSTAR TOYOTA-30 Cable also supports the following functions:
ID4A proximity key programming
(All keys lost, no need pincode)
ID8A-BA proximity key programming
(All keys lost, no need pincode)
ID8A-B9 proximity key programming
(All keys lost, no need pincode)
* Mileage calibration support for additional dashboards (e.g., R7F701441, R7F701442) coming soon.
Support Tools:
Use with:
OBDSTAR X300 Classic G3 (Key Master G3)
OBDSTAR X300 Pro4 (Key Master 5)
OBDSTAR Odo Master
* Supports use with third-party tools directly (unlimited functions)
OBDSTAR TOYOTA-30 Cable Support Models:
TOYOTA:
Yaris 2020–
Yaris Cross 2020–
Corolla Facelift 2022–
Corolla Cross Facelift 2022–
Sienna 2020–
Land Cruiser 2021–
Harrier/Venza 2020–
RAV4 Facelift 2022–
Tundra 2021–
ALPHARD 2023–
CAMRY 2024–
LEXUS:
NX 2022–
RX 2023–
www.chinaobd2.com
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!