OBDSTAR P50 new tutorial:
With Toyota V30.47 to reset airbag on Toyota 89170-08110 R7F7016443 Airbag ECU in bench mode no issues! It requires OBDSTAR CAN- FD Adapter and P004 Adapter Plus Jumper to work together. Must keep P50 in charging and communication in the whole process as well!
Menu function path:
Select Airbag Reset>> All>> Airbag Reset icon>> Airbag Reset V30.47
Input the ECU part number which can be found on the ECU label in the search box to quickly find the airbag ECU (Case insensitive, fuzzy search supported)
Choose Toyota 89170-08110 (DENSO) R7F7016443 (BENCH)
Operation steps:
Click “Start”
Connect the CAN-FD Adapter before performing the corresponding function
Click [Guide] and [Pinout] to view the detailed operation procedure and wiring diagram
Connect OBDSTAR P004 Adapter and airbag ECU via the P004 Jumper
Connect OBDSTAR P004 Adapter and CAN-FD Adapter, and connect to P50 via the main cable
Step 1: Read ECU info
Read out the part number and FW number
Step 2: Read DTC
There is a crash fault “P05BB:00-AB CRASH Event Storage Full and Locked!”
Step 3: Read and backup EEPROM
Tap Advanced Function>> Read EEPROM (R7F7016443)
Read and save data success
Disconnect the 12V power supply of P004 adapter (turn off the ignition) and wait for 30 seconds, and then reconnect it (turn on the ignition).
Step 4: Erase crash
Select the EEPROM data file just saved to erase
Erase crash in file successfully
Then continue to write the EEPROM data
Operation success
Disconnect the 12V power supply of P004 adapter (turn off the ignition) and wait for 30 seconds, and then reconnect it (turn on the ignition).
Step 5: Erase DTC
Erase DTC succeess
Step 6: Read DTC
There is no crash fault code now.
The Toyota airbag crash fault has been cleared by OBDSTAR P50 Airbag Reset Tool on bench successfully.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!