OBDSTAR P50 with Airbag reset software V30.54 can reset some JMC airbag ECUs with R7F701008 memory. The JMC R7F701009 is also can be supported now, check the details below.
OBDSTAR P50 JMC Airbag ECU Support List (only some parts):
| Brand | Part Number | ECU Manufacture | Memory | Method | Ecu Info. | Read DTC | Erase DTC | Erase Crash |
| JMC | CNHC15-14010-AA | CONTINENTAL | R7F701008 | BENCH |  |
|
|
|
| JMC | HP1-14010-BA | CONTINENTAL | R7F701008 | BENCH | |
|
|
|
| JMC | J38580687 | CONTINENTAL | R7F701008 | BENCH | |
|
|
|
| JMC | J3858541 | CONTINENTAL | R7F701008 | BENCH | |
|
|
|
| JMC | JP1-14010-AA | CONTINENTAL | R7F701008 | BENCH | |
|
|
|
| JMC | KP2-14010-CA | CONTINENTAL | R7F701008 | BENCH | |
|
|
|
| JMC | KP2-14010-CB | CONTINENTAL | R7F701008 | BENCH | |
|
|
|
| JMC | KP2-14010-DA | CONTINENTAL | R7F701008 | BENCH | |
|
|
|
| JMC | LC1-14010-AA | CONTINENTAL | R7F701008 | BENCH | |
|
|
|
| JMC | LP1-14010-AA | CONTINENTAL | R7F701008 | BENCH | |
|
|
|
| JMC | LP1-14010-AB | CONTINENTAL | R7F701008 | BENCH | |
|
|
|
| JMC | J38580738-P1360010011A0 | CONTINENTAL | R7F701009 | BENCH | |
|
|
|
JMC R7F701009 airbag ECU reset with P50:
1. Requirements
Need to use OBDSTAR P004 Adapter & Jumper, main cable, and 12V power supply to work together.
Keep P50 charging and make sure the network connection is normal during the operation, and then follow the operation guide in the tablet software to do step by step.
2. Menu path
Airbag Reset>> All>> Airbag Reset icon>> Airbag Reset V30.54>> BRAND>> FOTON>> FOTON J38580738-P1360010011A0 (CONTINENTAL) R7F701009 (BENCH)
3. Connect device and airbag ECU
Follow the Pinout to OBDSTAR P004 Adapter and airbag ECU via the P004 Jumper, and connect to P50 airbag reset tool via the main cable
Press the ON button on P004 Adapter after connection
4. Read ECU info
The airbag part number is the same as the airbag ECU
5. Read DTC
Detect the airbag fault code
6. Erase Crash
Erase the crash successfully, disconnect the 12V power supply and wait for 30 seconds, and then reconnect
7. Erase DTC
Erase DTC successfully
8. Read DTC again
No crash fault codes now!
JMC R7F701009 airbag ECU has been reset by OBDSTAR P50 Airbag ECU Tool perfectly.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!