OBDSTAR DC706 Tutorials: Read/Write VW 7GV/9GV ECM on Bench

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

OBDSTAR DC706 ECU Tool with P003 Adapter Kit read/write EEPROM/Flash, and read IMMO data on VW 7GV & 9GV ECMs on bench successfully.

1.OBDSTAR DC706 Read and Write VW 9GV ECM IMMO Date

2.OBDSTAR DC706 VW 9GV ECM Read and Write on BENCH

All devices and accessories required:

OBDSTAR DC706 host

OBDSTAR P003 Kit (P003 Adapter+ ECU Bench Jumper)

Main cable

VW 7GV/ 9GV ECM

Detailed operation:

Keep DC706 charging and communication through the process

Turn on OBDSTAR DC706 tablet

Select ECU Flasher>> All>> ECM>>ECM V30.17

Enter 7GV or 9GV in the search box to quickly find out the corresponding model below:

VOLKSWAGEN MAGNETI MARELLI IAW 7GV 95320 (BENCH)

VOLKSWAGEN MAGNETI MARELLI IAW 9GV CAN MPC5634+95320 (BENCH+P003)

Click “PINOUT” to check the related wiring diagram and follow it to connect the DC706 and ECM via OBDSTAR P003 Kit and main cable correctly

Supply the 12V power to DC706 ECU Tool

After connection, click “Start” to enter the operation interface

For VW 7GV:

Connection:

Directly read/write data without clicking “Connect”

Read and write eeprom (95320) – ok

Read IMMO data by selecting “Read eeprom (95320)”- OK

For VW 9GV:

Connection:

Click “Connect” to connect to ECU

Read eeprom (95320) and flash (MPC5634)- OK

Write eeprom (95320)- OK

Write flash (MPC5634)- OK

Read IMMO data by selecting “Read eeprom decrypted (95320)”

And click “Disconnect” to disconnect ECM and exit the job.

All right! It’s easy and fast to clone and read IMMO data on VW 7GV and 9 GV with OBDSTAR DC706 ECU Programmer via bench mode.

Learn more: https://www.chinaobd2.com/vp-obdstar-dc706-ecu-tool-full-version-plus-p003-kit.html

This Post: OBDSTAR DC706 Tutorials: Read/Write VW 7GV/9GV ECM on Bench From ChinaOBD2 Official Blog
Please keep this link if you copy the post!