Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
The OBDSTAR DC706 tool can retrieve Component Security (CS) and PIN codes for VW key programming via IMMO Data Decryption, in addition to its ECU cloning capabilities.
Here’s a review of using the DC706 to pull IMMO data from a 2011 VW Jetta ME17.5.6 ECU:
Reading EEPROM and Flash:
Read the EEPROM and flash on the 2011 VW Jetta ME17.5.6 ECU.
Using IMMO Decoder:
Use the IMMO decoder function to extract the CS, PIN code, and MAC from the ECU.
Advantages:
This method is much easier for All Keys Lost (AKL) scenarios compared to pulling the cluster.
Key Programming:
Load the extracted data into your key programmer to create a dealer key.
The process worked perfectly and the remote was manually programmed.
Final Steps:
Simply input the CS and PIN code to complete the programming.
Done! The process is simple and efficient.
Related posts:
How to Read and Write VW IAW 9GV ECM with OBDSTAR DC706 on Bench
How to Back up Files from OBDSTAR DC706 to PC
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!