Here in this instruction show you guide on how to use digits display to do parking brake test for New Holland LW 130.B Wheel Loader.
Related Contents:
2024 CNH EST 9.10 9.2New Holland Diagnostic Software Free Download
CNH DPA5 Diagnostic Kit
CNH eTimGo Offline
STEP 1
While testing, the machine must be on a clear level surface with the bucket in the travel position.
STEP 2
Start the machine and run the engine at low idle in third gear neutral.
STEP 3
Place the Transmission-Auto switch to the manual position.
STEP 4
Disengage the transmission cut off.
STEP 5
Place the Parking Brake switch in the ON position.
STEP 6
Shift the gear selector into third gear forward or reverse.
STEP 7
Press button P1 on the diagnostic center.
STEP 8
Press button P2 and highlight test.
STEP 9
Confirm the selection by pressing button P3 under
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!