Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
Windshied wiper blades replacement is a easy project for vehicle owner to perform.You just need to buy the windshied wiper blades,and follow the instruction.Here I want to share how to replace windshield wiper blades for Benz W204
It will take you about 15 minutes.
Applicable Models: Mercedes-Benz W204 (2008-14)
Hot Tip: Clean windshield before installing new blades
Windshield Wiper Blades For Mercedes-Benz W204
Related Post: How to replace windshield wiper blades
Procedures:
Both wiper blades on the Mercedes C-class are attached to the wiper arms by a single post(red arrows).No tools are needed to change them.The procedures for both blades are the same.
Begin by lifting the arm up while the wipers are in the off position.If you have worries at all about doing this job you should place a large thick towel on the windshield.If you let the wiper arm drop back onto the windshield while there is no blade on it you can crack the windshield and turn an inexpensive DIY job into an expensive one quickly.
Rotate the wiper blade 90 degrees from the arm.You can now just slide the blade off by moving it away from the arm(red arrow)
There is a bracket at the end of the wiper arm(red arrow) that will hold the blade in place when installed.
This photo illustrates how once the blade is installed and turned to the correct position the bracket (red arrow) holds it in place.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!