Lonsdor Tech released new Fiat Immobilizer software for K518 Pro and K518 series key programmer on April 23rd, 2024. Check the latest update info and learn how to read IMMO data and program new keys to Fiat via OBD.
Update Info:
1.Newly added the following Fiat models:
Grand Punto/2005-2014
500/2006-2017
Nemo/2007-2017
Bipper/2007-2017
Cinquecento/2007-2021
MiniCargo/2008-2021
Qubo/2008-2021
Fiorino/2008-2021
New Fiorino/2008-2021
Punto/2009-2021
Punto Evo/2009-2021
Pratico/2010-2021
Doblo/2010-2021
Viaggio/2011-2018
Panda/2011-2021
500C/2011-2021
Avventura/2014-2018
Egea/2018-2021
Tipo/2018-2021
Linea/2018-2021
500X/2018-2021
500E/2018-2021
New 500/2020-2022
New 500C/2020-2022
2.Support add key and all keys lost
*2018+ Fiat models require Lonsdor L-JCD cable.
How to read IMMO data and program key to Fiat by Lonsdor K518 Pro?
i.e. Fiat 500
Connect K518 Pro key programmer to a Fiat car, power on device, and connect to WiFi
Select Immo & Remote>> FIAT>> Select from vehicle>> Europe>> 500>> Mechanical key>> 2006-2017>> 70F3633_93C86_46
Step 1: Read IMMO data
Select [Read immo data]
Read out the chip, key type, Pincode, key count and key ID
Input a file name to save the IMMO data
Read and save Imm data successfully.
Step 2: Make dealer key
Select [Make dealer key]
And select the IMMO data just saved in step 1
Push open the card slot’s baffle on Lonsdor K518 Pro key programmer
Identify the current key ID
Generate and lock the dealer key successfully
Step 3: Program key
Select [Program key]
Insert the new key into the card slot of K518Pro key programmer
Switch ignition on
Enter the PINCode
Program key successfully
Done!
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!