Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
Here is a sample guide on how to remove steering axle (three wheel truck) for Linde 1275 series EC16 forklift.
Preparations:
2021 Linde Service Guide LSG 5.2.2 and 5.1.2 Free Download
Procedures:
Park the truck in a stable position, press the emergency stop switch and disconnect the battery plug connector.
Support the rear of the truck using wooden blocks.
Release the hydraulic system pressure.
Remove the two oil tubes from the left and right of the steering axle.
Disconnect the steering angle sensor plug 3X1.
Loosen the steering axle mounting bolt M16 X 80, tightening torque: 240 N
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!