Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
OBD2 Scanner Comparison: LAUNCH X431 PRO3 APEX, XTOOL D9PRO and Foxwell NT1009. What is the difference between them? Which one is better?
All are good scan tools. They have similarities and differences.
Similarities:
Launch PRO3 APEX and NT1009 support the same CPU, RAM, ROM, and Resolution.
PRO3 APEX and D9PRO support the same Android operating system and rear camera, and both support topology map.
Differences:
They come with different VCIs.
Launch is equipped with DBSCarVII, Xtool is equipped with XVCI Max, and Foxwell is equipped with VCI Dongle.
PRO3 APEX supports the most functions of all. It has Software Mall and supports FCA, ADAS, and key programming, but other tools don’t support it.
XTOOL D9PRO is the most expensive.
Foxwell is the cheapest, but it supports fewer functions than others.
Check the comparison table below.
| Item | X431 PRO3 APEX | XTOOL D9PRO | FOXWELL NT1009 |
| Image |  |  |  |
| VCI | DBSCarVII | XVCI Max | VCI Dongle |
| CPU | 2.0GHz 4-Core 1 | 1.8GHz 4-Core | 2.0GHz 4-Core |
| OS | Android l0.0 | Android l0.0 | Android 9.0 |
| RAM | 4GB | 2GB | 4GB |
| ROM | 64GB | 128GB | 64GB |
| Resolution | 1280X800 | 1024X768 | 1280X800 |
| Rear Camera | 8MP | 8MP | 5MP |
| Battery | 6300mAh,7.6V | 10000mAh,7.3V | 6300mAh,3.7V |
| Services | 37 | 42 | 31 |
| Topology Map | √ | √ | × |
| Software Mall | √ | × | × |
| FCA | √ | × | × |
| ADAS | √ | × | × |
| Key Programming | √ | × | × |
In conclusion, if you need a cost-effective OBD2 scan tool under $1,000, choose Launch X431 PRO3 APEX Scanner.
www.chinaobd2.com
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!