Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
Some units may experience leaking at the actuator bleed screw adapters. This instruction show you guide on how to repair actuator steering leaking trouble for Landoll Bendi DS series machine.More case for Landoll Bendi,please refer to Landoll Bendi Trouble Repair
Related Contents:
Landoll Bendi Forklift Service Repair Manual Download
Procedures:
Actuator bleeder repair kit, available through Landoll part number 195929 has been created to aid in the repair of leaking actuator bleeder screws. It consists of 2 new orings and 1 small tube of 545 Loctite. NOTE: There are no new bleeder screws with this kit, they are Landoll part number 189739 if needed.
Remove both bleeder screws from the actuator one at a time and install new oring from kit on the bleeder screw base and apply 545 Loctite on the threads before reinstalling. NOTE: The threads in the actuator don
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!