Skip to content
Menu
OBD2 Scanner Blog
  • Home
  • Car Diagnostic Tool
    • MB Star Diagnosis
    • BMW Diagnostic Tool
    • GM Tech2
    • Volvo Vocom Interface
  • OBD2 Code Scanner
    • VXDIAG
  • Tech Support
OBD2 Scanner Blog

Kess V3 Remap Peugeot 208 and Citroen C1/C3 Valeo V56 via OBD

Posted on December 24, 2024 by VCDS

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

Alientech Kess3 V1.84 Updated on January 31, 2024.

Remap via OBD Peugeot 208 and Citroen C1 and C3 with Valeo V56 ECUs.

Enhance performance and reduce fuel consumption on the latest supported vehicles.

Kess V3 Remap Peugeot 208 and Citroen C1/C3 Valeo V56 via OBD

Update info:

Thanks to KESS3, you can now work quickly and effectively on the Valeo V56 ECUs equipped on turbo-petrol engines 1.2 Pure-Tech and 1.0 VTi of some PSA Group vehicles. To read ECU information for the first time, allow the ECU unlock by applying a patch in BOOT mode on bench. Immediately after this operation, you can always reprogram via OBD.

New ECU: Valeo V56

With KESS V3, you provide a comprehensive and professional service on all fronts, from tuning to repair, reprogramming hundreds of ECUs with a single tool. This increases your customer base and the earning opportunities for your workshop.

CITROEN

RD, WR in OBD

C3 (3rd) 20181.2 PureTech 82Petrol61 kW
C1 (2nd) 20181.0 Vti 72Petrol53 kW

PEUGEOT  

RD, WR in OBD

208 (1st) 20191.2 PureTech 82Petrol61 kW
208 (2nd) 20191.2 PureTech 75Petrol55 kW

The above CITROEN/ PEUGEOT Valeo V56 also support boot mode.

Beside, Opel Corsa F (2019) 1.2 75 version can read and write ECU via OBD and Boot mode as well.

Kess V3 Remap Peugeot 208 and Citroen C1/C3 Valeo V56 via OBD Kess V3 Remap Peugeot 208 and Citroen C1/C3 Valeo V56 via OBD

Activate Kess V3 CAR – OBD or CAR – BENCH/BOOT protocols to work with maximum effectiveness in all connection modes on the latest supported vehicles, included in the subscription.

Quick guide to read and write Valeo V56:

Connect Kess V3 ECU Programmer and computer via USB cable, run Alientech Suite software

Select the corresponding Valeo V56 ECU model and the connection mode, and follow the manual to check the operation instruction and connect Alientech Kess V3 and ECU correctly, then perform the available function.

www.chinaobd2.com

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

Related Posts
How to Activate Windows 7 without Product Key |Windows is Not Genuine
Kess V3 Remap Peugeot 208 and Citroen C1/C3 Valeo V56 via OBD

Some Friends don't know how to activate win7, when they receive the diagnostic software with win7 sytem. http://www.chinaobd2.com/upload/software/win7activation.zip download this Read more

How to Install Original Mercedes BENZ EPC/WIS/ASRA net |China OBD2 Store
Kess V3 Remap Peugeot 208 and Citroen C1/C3 Valeo V56 via OBD

Please ensure that you choose computer systems that meet our requirements for the installation. You will find adetailed listing in Read more

How to Replace Benz W204 Engine Oil Filter
Kess V3 Remap Peugeot 208 and Citroen C1/C3 Valeo V56 via OBD

Frequent oil changes are perhaps the most important procedure you can do to maintain and prolong the life of your Read more

Toyota Previa MPV Smart Card All Keys Lost Programming Guide
Kess V3 Remap Peugeot 208 and Citroen C1/C3 Valeo V56 via OBD

Toyota Previa is an MPV produced by Toyota since 1990. It is called Estima (?????) in the Japanese market and Read more

This Post: Kess V3 Remap Peugeot 208 and Citroen C1/C3 Valeo V56 via OBD From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Post navigation

Prev: Prev: Toyota Key Generation and Program with Launch X431 IMMO Plus/Elite
Next: Next: CG100X V1.3.9.0 Update: Added 27 Models to Airbag and Dashboard Read-Write

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Recent Posts

  • How to Remove and Replace Cab Heater Controls for JCB 3CX Loader
  • How to Remove Differential Gear for FENDT 900 Vario COMIII
  • Quick Tips to Use Xhorse BMW G Series BDC2 Adapter
  • International MaxxForce 7 SPN 27 FMI 4 EGRP Signal Out of Range Low
  • Detroit DD13 SPN 84 FMI 3 MCM Vehicle Speed Sensor Open Circuit

Recommend OBD2 Scanner

ME9.7 ECU Engine Computer ME9.7 ECU Engine ComputerTabScan T6PT3G Diagnosis VCI for Porsche Diagnostic Tool Porsche Diagnostic Tool

Recent Comments

  • VCDS on Scania SDP3 2.59.1 free download Scania Diagnosis & Programming 3 download link
  • Glynn McKay on Scania SDP3 2.59.1 free download Scania Diagnosis & Programming 3 download link
  • jakub brosz on Scania SDP3 V2.64.3 Download link
  • amr on MAN EOL Flash File Editor + MAN Immo Calculator Free Download
  • Pasquale Greenwald on Jungheinrich ETM/V 10-12 Tightening Torque for Screwed Connection on Brake Systems

Archives

Categories

  • BMW Diagnostic Tool
  • Car Diagnostic Tool
  • Key Cutting Machine
  • Key Programming Tool
  • MB Star Diagnosis
  • OBD2 Code Scanner
  • Tech Support
  • VXDIAG

Tags

adapter Auto Pick and Decoder Car Key Copy Car Key Programmer cat Code Reader diagnostic software ECU Chip Tunning ecu programmer Ford gm handy baby Handy Baby 2 Key Programmer Handy Baby II Key Programmer HEX V2 immo iprog key Key Pro key programmer laptop Launch lish LISHI new arrivals nexiq nexiq link diesel truck interface nexiq truck diagnostic NEXIQ USB Link OBD2 obdii original program Scania VCI smart VAG COM Cable VCDS VCDS Cable VCDS VAG COM Cable vci VW wholesale X-PROG Box X-PROG Box ECU Programmer XPROG-M

Hot Selling

  • Launch CRP129 HD
  • ME 9.7 ECU Engine Computer
  • MINI VCI J2534
  • NCF29XX Programmer

Links

  • BOBD2 Auto Diagnostic Tools Market
  • China OBD2
  • EPS Foam Machine
  • Foxdiag
  • Сканер OBD2
©2025 OBD2 Scanner Blog | Powered by chinaobd2