Related Contents:
Jungheinrich JETI ForkLift Judit-4 v4.37 4.34 2023 Free Download
Jungheinrich JETI ET 4.37 4.34 EPC 2023 Free Download
2023 Jungheinrich Forklift JETI SH v4.36 v4.34 Service Free Download
Cut pipe at right angle and deburr
All threaded parts must be oiled (do not grease)
Push nut l and cutting ring 2 over the end of pipe 3
1.Screw nut by hand onto the male member.
2.Push pipe in till it comes to rest.
3.Tighten with wrench about 3/4 turn.
4.The cutting ring will cut itself with its edge into he pipe.
5.Unscrew nut fom male member.
1 Checking the cutting edge.
It is of no importance if the cutting ring can be turned on the end of the pipe.
2 The final fitting on the male member is performed with another 3/4 turn.
For more Jungheinrich trouble repair case,please refer to Jungheinrich Trouble Repair
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!