Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
The main brake cylinder is used to initiate and control the braking action.
Main brake cylinders for brake systems incorporating drum brakes are fitted with a bottom valve to ensure a rapid brake response at short pedal travel.The bottom valve (1) ensures that the brake fluid contained in the brake system is constantly kept under a slight over pressure (pilot pressure 0.4 -1.7 bar pressure gauge reading) when the brake pedal is not operated so that the braking action will commence immediately when the brake pedal is depressed.
Related Contents:
Jungheinrich JETI ForkLift Judit-4 v4.37 4.34 2023 Free Download
Jungheinrich JETI ET 4.37 4.34 EPC 2023 Free Download
2022 Jungheinrich Forklift JETI SH v4.36 v4.34 Service Free Download
Main brake cylinders for brake systems incorporating disc brakes are fitted with special bottom valves (bottom valve provided with throttle bore), as contrary to drum brake systems, no pilot pressure must exist in the brake system(pressure gauge reading 0 bar when the brake pedal is not operated).
To avoid any confusion between the two different brake cylinders,the main brake cylinders destined for disc brake systems are fitted with a metal or adhesive tape bearing the inscription
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Some Friends don't know how to activate win7, when they receive the diagnostic software with win7 sytem. http://www.chinaobd2.com/upload/software/win7activation.zip download this Read more
Please ensure that you choose computer systems that meet our requirements for the installation. You will find adetailed listing in Read more
Frequent oil changes are perhaps the most important procedure you can do to maintain and prolong the life of your Read more
This article show a guide on how to use G-scan2
Please keep this link if you copy the post!