This instruction show you guide on how to solve JCB stage V engine K4732 intake air temperature sensor,temperature out of range trouble.
Related Content:
WinEEM4s JCB Service Tool 2.7.2 2.6.1 Free Download
2017 JCB Parts Plus+ and Repair Service Manual Free Download
2022 JCB ServiceMaster 4 Free Download for Win 7/Win 8/Win 10
Description
The EEM monitoring system has detected that intake air temperature sensor value is implausible.
Possible causes are:
The intake air temperature sensor wiring contact is loose.
The intake air temperature sensor wiring is defective.
The intake air temperature sensor is defective.
Reaction in EEM
The FC is stored and the warning lamp is activated. The CAN message indicates an active fault.
Solution
First save the error log and then do the procedure that follows:
Examine the intake air temperature sensor wiring, the connectors and the contact surfaces of the connector pins (possible oxidation).
Try the operation with another intake temperature sensor to see if the sensor is defective.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!