Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
Here is the instruction show you guide on how to repair JCB backhoe loader 3X/4X/5X B00B729 seat switch signals disagreement.
Related Contents:
WinEEM4s JCB Service Tool 2.7.2 2.6.1 Free Download
2024 JCB ServiceMaster 4 v24.6.2 Free Download for Win 10 Win11
2017 JCB Parts Plus+ and Repair Service Manual Free Download
DTC-FTB Description
Seat Switch Signals Disagreement
Information
Service Procedure
Important: Stop the engine and let it cool before you start work. Do not start the engine during the service procedures. (SN0001)
1 Check for any debris or water inside the connector terminals. This may be as a consequence of pressure washing, loose connectors or poor connector sealing.
2 Check the harness is not damaged and is routed correctly.
3 Check seat harness for correct fitment.
4 The signal may also be checked using ServiceMaster. Switch ignition ON and using Servicemaster BHL machine diagnostics tool, navigate to tab 3.11 ‘Seat Position Status’.
5 There is a disagreement if there is input from both J1-08 and J2-03.
More repair case for JCB,please refer to:JCB Trouble Repair
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!