Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
This instruction show you guide on how to replace Allison transmission control modules for ISUZU F-Series 6.7L diesel truck.
Related Contents:
ISUZU US-IDSS II 2024 2019 Diagnostic Software Free Download
2024 2019 Isuzu G-IDSS Export Diagnostic Software Free Download
ISUZU IDSS MX2-T Diagnostic Adapter
Nexiq USB Link 2
Transmission Control Module (TCM) Replacement
The Transmission Control Module (TCM) (TCM Connector B-228) is located on the front crossmember in the left front corner of the frame area.
Removal Procedure
1 Remove the 3 nuts and bolts (2) securing the TCM cover (1) to the frame.
2 Unthread bolt securing the TCM harness connector B-228 to the TCM and remove the connector.
3 Remove the bolts (1) securing the TCM to the frame and remove the TCM.
Installation Procedure
1 Install the TCM with the 3 bolts (1) to the frame.
Tighten the TCM bolt to 10 N·m (7.3 lb·ft)
2 Connect the TCM harness connector B-228 and tighten the connector bolt.
Tighten the electrical connector bolt to 2 N-m (17 lb in).
3 Install the TCM cover (1) with the 3 bolts (2) to the frame.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!