This illustration show you guide on how to program fuel injector ID codes for ISUZU Euro4 N series truck with 4JJ1 engine.
Related Contents:
2022 2019 Isuzu G-IDSS Diagnostic Software Free Download (Troubleshooting Guide Included)
ISUZU IDSS Diagnostic Adapter(Support Programming/Flashing)
Procedures:
1.Install a scan tool.
2.Turn ON the ignition, with the engine OFF.
3.Select Diagnostics>appropriate vehicleidentification>appropriate engine model>
Programming>Injector Programming.
4.In order to get programming approval, the on screen displays a message to user. Get programming approval from the TIS 2000 using the following procedure:
a.Connect a scan tool to the terminal that installed TIS 2000 with the latest software and the hardware key is plugged into port.
b.Turn ON the scan tool and keep at title screen.
c.Launch the TIS application.
d.Select the Security Access at the main screen.
e.Highlight the
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!