What is ImmoTool?
ImmoTool can disable immo system in PSA EDC15 ( 1 PLUG and 3 PLUG ) without touching eprom, it can be done with galetto1260 in few seconds
ImmoTool Support List:
-EDC17/MEV17/MED17 IMMO OFF supported on VAG/PORSCHE/OPEL/IVECO/FIAT/PSA
BDM EPROM SUPPORT FOR EDC16 ON PSA AND VAG
– PSA EDC15 IMMO OFF on 95P08 on model where not possible to REMOVE IMMO only in flash 29F400.
– PSA EDC15C7 (2plugs) Boxer, Jumper – IMMO OFF on 29F400 with auto calculation of checksum (first in the world).
– PSA SIEMENS SID803(A) VIRGIN 95320.
– PSA SIEMENS SID803(A) Calculate/Change pin in dump 95320.
– PSA SIEMENS SID801(A) VIRGIN/OFF
– PSA BSI Valeo/JohnsonControls/Siemens VIRGIN EPROM 95160, 25C128, ST95128, 912DG128.
– RENAULT EDC15 VIRGIN 95P08
– VAG M3.8.X IMMO OFF 24c02 (version1 and version2) PETROL.
– FIAT EDC15C7 (2plugs) Ducato, Stilo – IMMO OFF 29F400 with auto calculation of checksum (first in the world).
– MINOR BUG FIXED 18/01/2014.
IMMO OFF ON PSA BOSCH EDC16C34 95160
– IMMO OFF ON VAG BOSCH EDC15 & EDC16 24c04/95320
– IMMO OFF ON PSA VALEO J34P 95160
– IMMO OFF ON RENAULT SIEMENS EMS3132/SIRIUS32/SIRIUS34 (N) 29F200 (without CAN)
– VIRGIN ON PSA BOSCH EDC15C2 5P08
IMMO OFF & VIRGIN on ECU’s PSA BOSCH EDC16C3 by the intervention of the EPROM 95160.
IMMO OFF on PSA BOSCH EDC15C2/C3 ECU’s, 1 and 3 plug by the intervention on 29F400, 100% work without problem, NO NEED TO INTERVENE ON EPROM.
ImmoTool V1.5 Installation Requirements:
– O.S.: Windows XP; Windows Vista; Windows 7; Windows 8
– CPU: Pentium/Athlon 1 GHz or higher
– RAM: 256 MB of system memory
– Hard Drive: 50 MB of available space
– CD-ROM
Note: To use this software you must disable antivirus .
ImmoTool V1.5 Free Download:
How to Install & Use ImmoTool V1.5:
After downloading the ImmoTool v1.5,extract the zip file on the desktop.
Double click
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!