This is a guide on how to coding for BMW Mini R56.Follow this instruction to get the many coding features for BMW Mini R56 options.
What You Need for Coding for BMW Mini R56 Coding?
BMW K+CAN Cable
BMW Expert Coding Software Download
BMW Coding/Flashing/Progrmming PDF+Video Guide
NCS Expert program and coding guide
BMW Mini R56 Coding Sheet
| FunctionTitle | Description | Module | Function value | 2007 | 2008 | 2009 | 2010 | 2011 | 2012 |
| Remote closing windows | Comfort close windows by holding the “lock” button on the key fob. Change from nicht_aktiv to aktiv. |
CAS | KOMFORTSCHLIESSUNG_FB | X | X | X | X | X | X |
| Auto Door Unlock | Unlocks all doors when you remove key (regular) or when the engine shuts off (comfort access).Auto-locking needs to be enabled for this to work. |
CAS | ER_KEYOUT_AUTOVR | X | X | X | X | X | X |
| Selective Unlocking with Remote | Unlocks just the driver’s door (aktiv) or all doors (nicht_aktiv) when unlocking. Set separately for each remote (x = 1,2,3,4) |
CAS | SEL_ZV_SENDER_x | X | |||||
| Power Windows after Ignition Deactivation | Enables power windows for one minute after ignition is turned off |
CAS | FH_ABSCHALTKRITERIUM | X | X | X | |||
| Efficient Dynamics shift indicator suggestions enable when crusing |
Just change SCHALT_PKT_DAUERHAFT from nicht_activ to activ |
KOMBI | SCHALT_PKT_DAUERHAFT | X | |||||
| Always Show Digital Speed | Will make your speed always show like the 2011 Models. You can see your MPG and speed at the same time! Or you can reverse it to have your 2011 act like the older models. |
KOMBI | DIG_SPEED_PERMANENT | X | X | X | X | X | X |
| Disable speed overestimation | Will make the speed on the tach more correct instead of 2-7 MPH faster than actual speed if set to nicht_activ. |
KOMBI | BC_DIGITAL_V_KORREKTUR | X | X | X | X | X | |
| Key Gong Reminder -door open | Will shut off the chime when the keyfob is in the slot and the door is opened. Change to activ to enable. |
KOMBI | CC_ZUENDSCHLUESSEL | X | X | X | X | X | X |
| Road Freeze Temperature Warning | Change to nicht_aktiv to eliminate the Check Control message when the temp falls past 37 How useful was this post? Click on a star to rate it! Average rating / 5. Vote count: Please keep this link if you copy the post! |