How to Use Xhorse MLB Solder Free Adapter for MLB Tool?

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

Xhorse MLB Solder Free Adapter Kit is specially designed to work with Xhorse VVDI MLB Tool to add spare MLB keys for VW, Audi, Lamborghini, Bentley and Porsche. No need to solder. Only need to remove 2 capacitors using a plier.

MLB Solder Free Adapter Kit comes with 5 types:

Type 1 and Type 2 are for Audi and Lamborghini

Type 3 is for Audi and Bentley

Type 4 is for Porsche

Type 6 is for Volkswagen and Touareg

How to connect MLB Solder Free Adapter and MLB Tool?

Step 1: Remove Capacitors from the Original Key

i.e. use with Key Tool Plus

Connect the Xhorse MLB Tool to VVDI Key Tool Plus Pad using an OTG converter.

Select Immo Programming>> Audi >> Select by Type>> MLB Immobilizer Systems

Select the corresponding key type and check the wiring diagram.

Remove the two capacitors from the original key as indicated in the diagram.

Step 2: Connect the MLB Solder-Free Adapter to Original MLB Key Board

Align the pins on the adapter with the contacts marked on the wiring diagram.

Fasten the buckle securely:

The short side of the buckle should face upwards.

The long side, marked in white, should face downwards.

Step 3: Connect MLB Adapter to MLB Tool

Attach the Xhorse MLB Adapter to the key.

Connect the MLB Adapter to the MLB Tool, ensuring proper orientation.

Ensure the adapter ends up in the sensing area for accurate detection.

After connection, you can add spare MLB keys by MLB Tool and Key Tool Plus or Xhorse VVDI2.

Learn more:

Xhorse VVDI MLB Tool User Guide

Xhorse XDMLBPGL MLB Tool Solder-free Adapter Kit:

https://www.chinaobd2.com/

This Post: How to Use Xhorse MLB Solder Free Adapter for MLB Tool? From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Tags: adapter cat Immobilizer key obdii original Porsche vvdi VW xhorse