Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
How to use Xhorse Key tool max with Mini OBD Tool program 2018 Mazda universal key. Here is the tutorials.
Steps:
1.Insert Xhorse Mini OBD into the vehicle’s OBD port
2.Use Xhorse APP on smart phone or Key Tool Max to select ‘IMMO Programming’
3.Scroll down and select vehicle make: Mazda
Then select by regional car model>> USA>> Mazda3>> Smart key system>> 2017- >> Add a key
4.Follow the on- screen instruction to do
Take all smart keys out of car
5.Press start button of vehicle for 10 seconds, then press start button again when the indicator light of start button changes to yellow.
Operation completed!
6.Switch ignition on
It prompt ‘current number of smart keys: 3, whether to continue?’
7.Click ‘Yes’ to continue
8.Read the password (some models may not be able to read the password but only to query the password)
9.Complete to read password, continue to match
10.Configuring the system, 7 minutes are needed, please be patient. Wait for about 7 minutes for the horn to sound
11.Steps on brakes when automatic-shift
12.Step on the clutch when manual- shift, and keep the mark end of the smart key to be programmed close to the start button, take other keys out of the car
Test: Remote is working.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!