X

How to use Launch X431 IMMO to add a new key for Porsche Cayenne 2011-2017


This instruction show you guide on how to use Launch X431 IMMO to add a new key for Porsche Cayenne 2011-2017. For more repair case about Porsche,please refer to:Porsche Cayenne Repair Cases.

Device Requires:

LAUNCH X431 IMMO

Procedures:

Select “Porsche”à”Anti-Theft Key Matching”à”CAYENNE”à”2011-2017”

Please follow the picture to build connection:connect to the immobilizer programmer G3,and click “OK”

Click “Read immobilizer data”

Select “5M48H”à”View the wiring diagram”

Connect the ECU and G3 programmer according to the wiring diagram.The amount of data is large.

To improve communication stability,use the USB cable to connect the tablet and the Bluetooth connector.


Click “Back up EEPROM data”

Input file name to store in on your X431 device (here file name eep)

Now back to menu to select “Generate dealer keys”

Place new key you want to add to G3 programmer slot

Select the EEPROM data file you read before (name eep)

Select unused location to generate new key

Generate new key successfully

Now back to select “Learn Keys”

Now here you need re-match all key

Here select the eep file read before again

How-to-use-Launch-X431-IMMO-to-add-a-new-key-for-Porsche-Cayenne-2011-2017-13

Input the number of keys to be match:2

Insert new key and switch to ON


Then it will ask you to match second PC,just do same steps

After then matching completed.

More test report about Launch X431 please check:Launch X431 Test Report

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

This Post: How to use Launch X431 IMMO to add a new key for Porsche Cayenne 2011-2017 From ChinaOBD2 Official Blog
Please keep this link if you copy the post!
Categories: Tech Support
Tags: catEEPROMEPROMimmokeykey for PorscheLaunchLaunch X431PorscheprogramtabletX431
" VCDS : ."