Skip to content
Menu
OBD2 Scanner Blog
  • Home
  • Car Diagnostic Tool
    • MB Star Diagnosis
    • BMW Diagnostic Tool
    • GM Tech2
    • Volvo Vocom Interface
  • OBD2 Code Scanner
    • VXDIAG
  • Tech Support
OBD2 Scanner Blog

How to Update Cummins Insite Software for Win 7/Win 8

Posted on February 24, 2019February 24, 2019 by VCDS

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

These instructions should be used if INSITE 8.0.0, INSITE 8.0.1, INSITE 8.0.2, or INSITE 8.0.3 are already installed on a computer with Windows 7 or Windows 8.

For the Windows 10 Operating System, INSITE 8.0.0, INSITE 8.0.1, INSITE 8.0.2, or INSITE 8.0.3 should not be installed as it is not supported. Please refer to the NEW INSITE INSTALLATION INSTRUCTIONS.

 

Note: It is recommended to ensure that Microsoft .NET Framework 4.5.2 is installed prior to starting the INSITE installation. Windows 8.1 will have Microsoft .NET Framework 4.5.2 installed by default or after all the Windows updates have been run.

 

Recommend Contents for Cummins Insite:

Newest Cummins Insite 8.4.1 Free Download

Original Cummins Insite 8.2.1.155 Installation Instructions

 

 

Update Cummins Insite for Window 7:

1.After putting the disc in the DVD drive, click on the Run autorun.exe field:

How to Update Cummins Insite Software for Win 7/Win 8

1.1 Alternately, if the AutoPlay is not enabled, open Windows Explorer, find the DVD-ROM drive (could be any letter), and click on the autorun or autorun.exe Application file:

How to Update Cummins Insite Software for Win 7/Win 8

2.If the Cummins Inc. Update Manager is already installed, proceed to step 12.

3.If Cummins Inc. Update Manager is not installed, in the INSITE Installation Menu that opens, click on Manual Install Options:

How to Update Cummins Insite Software for Win 7/Win 8

4.In the Manual Install Options screen, click on Required Installs:

How to Update Cummins Insite Software for Win 7/Win 8

5.In the Required Installation screen, click on Install Update Manager:

How to Update Cummins Insite Software for Win 7/Win 8

6.Approve the User Account Control prompt.

7.In the InstallShield Wizard language selection prompt, select the appropriate language, and then click on OK:

How to Update Cummins Insite Software for Win 7/Win 8

8.In the following InstallShield Wizard screen, click on Next:

How to Update Cummins Insite Software for Win 7/Win 8

9.In the next Installation screen, click on Install to start the installation:

How to Update Cummins Insite Software for Win 7/Win 8

10.In the InstallShield Wizard Completed screen, click on Finish:

How to Update Cummins Insite Software for Win 7/Win 8

11.When you return to the Required Installations screen, click on Main Menu:

How to Update Cummins Insite Software for Win 7/Win 8

12.In the INSITE Installation Menu, click on Upgrade INSITE:

How to Update Cummins Insite Software for Win 7/Win 8

13.If you have just installed Cummins Inc. Update Manager, proceed to step 17:

 

14.If Cummins Inc. Update Manager was already installed and has not yet been updated, click Yes in this prompt to update the Cummins Inc. Update Manager:

How to Update Cummins Insite Software for Win 7/Win 8

15.Click on OK in the prompt to exit the Cummins Inc. Update Manager:

How to Update Cummins Insite Software for Win 7/Win 8

16.Click on OK in the prompt notifying the user that the Cummins Inc. Update Manager was successfully updated:

How to Update Cummins Insite Software for Win 7/Win 8

17.In the Cummins Inc. Update Manager click on the middle blue button with yellow file folder to Install Updates:

How to Update Cummins Insite Software for Win 7/Win 8

18.If you have Microsoft .NET Framework 4.5 or greater installed, please proceed to step 23.

 

If you still have Microsoft .NET Framework 4.0 installed, you will be asked to upgrade to Microsoft .NET Framework 4.5:

How to Update Cummins Insite Software for Win 7/Win 8

19.You will be asked to restart the operating system. Click on Yes:

How to Update Cummins Insite Software for Win 7/Win 8

20.After the system has been restarted, you will again need to go into Windows Explorer, and find the autorun or autorun.exe Application file to restart INSITE 8.1.0 & 8.1.1 installation DVD:

How to Update Cummins Insite Software for Win 7/Win 8

21.In the INSITE installation menu, again click on Upgrade INSITE:

How to Update Cummins Insite Software for Win 7/Win 8

22.In the Cummins Inc. Update Manager click on the middle blue button with yellow file folder to Install Updates:

How to Update Cummins Insite Software for Win 7/Win 8

23.The Update Manager will show the progress of the installation of INSITE 8.1.0 and other files:

How to Update Cummins Insite Software for Win 7/Win 8

24.Once all the updates are complete, click on the green check mark:

How to Update Cummins Insite Software for Win 7/Win 8

25.Again, click on the middle blue button with the yellow file folder to Install Updates:

How to Update Cummins Insite Software for Win 7/Win 8

26.The Update Manager will show the progress of the installation of INSITE 8.1.1:

How to Update Cummins Insite Software for Win 7/Win 8

27.Once the updates are complete, click on the green check mark:

How to Update Cummins Insite Software for Win 7/Win 8

28.It will now tell you that No new updates are available:

How to Update Cummins Insite Software for Win 7/Win 8

29.You will now need to change the drop-down box in the top right-hand of the window to point to the Internet. At this point, you will need a good and stable Internet connection. Click on the left-hand green button:

How to Update Cummins Insite Software for Win 7/Win 8

30.The Cummins Inc. Update Manager will update itself. Click Yes in this prompt to update the Cummins Inc. Update Manager:

How to Update Cummins Insite Software for Win 7/Win 8

31.You will see a prompt requesting you to restart the operating system. Click on Yes, but it may or may not restart the operating system, and you are not required to restart the operating system:

How to Update Cummins Insite Software for Win 7/Win 8

32.Click on OK in the prompt notifying the user that the Cummins Inc. Update Manager was successfully updated:

How to Update Cummins Insite Software for Win 7/Win 8

33.The Cummins Inc. Update Manager will again update itself. Click Yes in this prompt to update the Cummins Inc. Update Manager:

How to Update Cummins Insite Software for Win 7/Win 8

34.The Cummins Inc. Update Manager will show the progress of the download of the Update Manager:

How to Update Cummins Insite Software for Win 7/Win 8

35.Click on OK in the prompt to exit the Cummins Inc. Update Manager:

How to Update Cummins Insite Software for Win 7/Win 8

36.Click on OK in the prompt notifying the user that the Cummins Inc. Update Manager was successfully updated:

How to Update Cummins Insite Software for Win 7/Win 8

37.In the Cummins Inc. Update Manager click on the middle blue button with yellow file folder to Install Updates:

How to Update Cummins Insite Software for Win 7/Win 8

38.The Update Manager will show the progress of the downloads and installation of INSITE 8.1.2 and other files:

How to Update Cummins Insite Software for Win 7/Win 8

39.Once all the updates are complete, click on the green check mark:

How to Update Cummins Insite Software for Win 7/Win 8

40.You may be prompted again to update some FIS files. Again, click on the middle blue button with the yellow file folder:

How to Update Cummins Insite Software for Win 7/Win 8

41.Once the updates are complete, click on the green check mark:

How to Update Cummins Insite Software for Win 7/Win 8

42.Once all the updates are complete, it will state that No new updates are available. Click on the right-hand red button to exit:

How to Update Cummins Insite Software for Win 7/Win 8

43.Click on Yes to exit the Cummins Inc. Update Manager:

How to Update Cummins Insite Software for Win 7/Win 8

44.In the INSITE Installation Menu, click on Exit to close the screen:

How to Update Cummins Insite Software for Win 7/Win 8

45.Find the Cummins INSITE icon on the desktop and double click on it. If you still have a valid active license, INSITE should open.

 

 

Update Cummins Insite for Window 8:

Window 8 Cummins Insite update is same as Window 7.The only different is Windows 8 will already have Microsoft .NET Framework 4.5 or greater installed,can can skip this step to step 23.

 

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

This Post: How to Update Cummins Insite Software for Win 7/Win 8 From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Post navigation

Prev: Prev: Carprog Read Motorola MC68HC08xx Series Gudie
Next: Next: FORScan Reverse Tilt Mirror Calibration for Ford F150

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Recent Posts

  • Yanhua Module 38 Update BMW BDC2 Reflash and Replace Functions
  • Vapon Update BDC2 IMMO Module Data Erase
  • How to Replace U17 and L8 Components for OBDSTAR G3 Startup Failure?
  • Alientech Kess3 Adds Master TCU OBD-Bench-Boot Protocol
  • Scania Truck ALM Alarm System ALM404 Fault in the CAN Communication Solution

Recommend OBD2 Scanner

ME9.7 ECU Engine Computer ME9.7 ECU Engine Computer TabScan T6PT3G Diagnosis VCI for Porsche Diagnostic Tool Porsche Diagnostic Tool

Recent Comments

  • amr on MAN EOL Flash File Editor + MAN Immo Calculator Free Download
  • Pasquale Greenwald on Jungheinrich ETM/V 10-12 Tightening Torque for Screwed Connection on Brake Systems
  • VCDS on Scania SDP3 2.53.1 Diagnosis & Programming Free Download
  • Crossley on What are the functions of Iprog+ Programmer?
  • Lukas on VAG EDC15 EDC16 IMMO OFF Software Free Download

Archives

Categories

  • BMW Diagnostic Tool
  • Car Diagnostic Tool
  • Key Cutting Machine
  • Key Programming Tool
  • MB Star Diagnosis
  • OBD2 Code Scanner
  • Tech Support
  • VXDIAG

Tags

adapter Auto Pick and Decoder Car Key Copy Car Key Programmer cat Code Reader diagnostic software ECU Chip Tunning ecu programmer Ford gm handy baby Handy Baby 2 Key Programmer Handy Baby II Key Programmer HEX V2 immo iprog key Key Pro key programmer laptop Launch lish LISHI new arrivals nexiq nexiq link diesel truck interface nexiq truck diagnostic NEXIQ USB Link OBD2 obdii original program Scania VCI smart VAG COM Cable VCDS VCDS Cable VCDS VAG COM Cable vci VW wholesale X-PROG Box X-PROG Box ECU Programmer XPROG-M

Hot Selling

  • ME 9.7 ECU Engine Computer
  • MINI VCI J2534
  • NCF29XX Programmer
  • ThinkTool Pros+

Links

  • China OBD2
  • EPS Foam Machine
  • Foxdiag
  • Сканер OBD2
©2025 OBD2 Scanner Blog | Powered by chinaobd2