This instruction show you guide on how to test pressure for Scania C,K series truck EGR system.
Related Contents:
2022 Scania SDP3 V2.53.2 V2.40 Diagnostic Software Free Download
2021 2018 Scania Multi EPC Parts Catalogue Free Download
Procedures:
Note:Sulphuric acid can be formed in the pipe downstream of the EGR cooler. Remember to use safety equipment!
1.Remove the inlet pipe from the intake of the turbocharger.
2.Clean the flange of the turbocharger inlet and the inside of the rubber hose on 99 620 Pressure cap.
3.Fit 99 620 Pressure cap to the turbocharger intake. Tighten the hose clamp.
4.Turn the flywheel using 99 309 Turning tool in the direction of engine rotation until the
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!