Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
Issues:
When programming BCM by tech2 scan tool,It has the following problem.
Why the tech 2 scanner is telling it can program the vin because the controller is locked, what does that mean? I also use the VCX nano GM and obtained the same results, controller locked.
Solution:
Mayble the BCM is not the right one for the car. Another user has run into the same kind of a problem. Just because the part number on the BCM is the same as the Solstice does not mean the software that is on it is correct for the vehicle. That software is coded onto the unit when it is made and it is not something that can be changed.
The BCM cannot be
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Related Posts
Tips & Warning: Chrysler Diagnostics & Programming by MicroPod 2
2019.03.11
Iprog+ Pro Programmer ECU programmer Mileage Correct Tool V80 vs.V77 V76
2019.12.19
SOFi SP8-F USB Programmer+Offline Programming EEPROM SPI BIOS Support 5000+Chip
2018.12.17
How to Solve SVCI 2020
2020.01.4
2019 Lonsdor K518S VS 2017 K518ISE: wins in 3 packages
2019.03.8
How to Fix Error 749 for MB Star SD Connect C4 ?
2024.01.28
Installation guide for 2019 latest version iProg+ Programmer V76 Software
2019.08.7
How to Update Original & Crack wiTech Chrysler Diagnostic Software
2019.07.24
Renault CAN Clip V195 and Consult 3 III For Nissan Professional Diagnostic Tool ...
2020.11.4
VIIPlusLoader 08.021.09 FULL Installer For VCDS 21.9 Free Download
2021.09.7