Troubleshooting intermittent faults is very difficult. Re-creating the fault is going to be the most beneficial method of narrowing down the possible problems. If this is not possible, there are methods of identifying the problem areas. Below are a few:
Possible Causes:
1.Corroded connections
2.Broken wires (visible or inside the insulation)
3.Poor system grounds
4.Bad battery cables
5.Pushed back pins
6.Female pins damaged or expanded
7.Worn wire harness
8.Poor wire repairs done at a previous time
More repair topic for Bobcat,please refer to:Bobcat Excavator Repair
Troubleshooting these problems should involve the following steps:
1.If possible, find out all necessary details as to when the error occurs
a.when it happens (at start-up or after operation)
b.when it doesn
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!