Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
CNH DPA5 diagnostic kit support all RP1210A, RP1210B, and RP1210C compliant applications that support J1708/J1587,CAN/J1939, J1850 VPW (GM Class II) and the ISO15765 protocols. The DPA also works with applications that were specifically written to use the DG non-RP1210-compliant native drivers for other protocols, such as GM UART and ISO9141. This post shows how to configure the most common RP1210-compliant diagnostic applications to work with the DPA 5.
Related Contents:
2022 New Holland Electronic Service Tools 9.6 9.2 CNH EST Software Free Download
Notes on Selecting an RP1210 Compliant Adapter
Selecting a RP1210 adapter, commonly referred to as a Vehicle Datalink Adapter (VDA) varies widely from application to application; however, the terminology remains pretty much the same. The following table helps to introduce you to the terminology and helps you to make the correct selections the first time.
You must set up every application (in their own individual way) to use the DPA!
Not all OEM applications save the adapter configuration! Some make the user select the adapter to be used every time the application is opened.
Configuring Applications to Use the DPA 5
The following examples show how to select your DPA 5 device using the USB cabling method.
Allison DOC
1.Start program.
2.Click Connect to Vehicle.
3.Select the Correct Transmission Type.
4.Uncheck Smart Connect.
5.Click Connect.
6.Click Advanced Setup.
7.Select vendor of Dearborn Group DPA 5 Multiple Application.
8.Select protocol of J1939 or J1708.
9.Select correct device of DPA 5 Dual CAN USB (or DPA 5 #[DPA 5 Bluetooth ID] Bluetooth).
10.Click OK.
Bendix ABS Diagnostics
NOTE: DO NOT RUN Bendix ABS Diagnostics until you have done the following:
1.Start program.
2.If Diagnostic Interface Selection dialog box does not appear, click on Vehicle Interface Adapter icon.
a.Select RP1210A Device Using J1708 Line: DPA 5 Dual CAN USB (or DPA 5 #[DPA 5 Bluetooth ID] Bluetooth).
3.Click OK.
Caterpillar Electronic Technician
1.Start Program.
2.Click Utilities
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Some Friends don't know how to activate win7, when they receive the diagnostic software with win7 sytem. http://www.chinaobd2.com/upload/software/win7activation.zip download this Read more
Please ensure that you choose computer systems that meet our requirements for the installation. You will find adetailed listing in Read more
Frequent oil changes are perhaps the most important procedure you can do to maintain and prolong the life of your Read more
This article show a guide on how to use G-scan2
Please keep this link if you copy the post!