How to Set DOIP for Benz MB SD C4 Diagnostic Kit on Win10

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

It is necessary to set DOIP for your MB SD C4 connect diagnostic kit,otherwise the DOIP function and wireless can not work well.

Preparations:

2024.03 Benz Xentry.OpenShell.XDOS Diagnostic Software Free Download

How to Install Benz Xentry 2024.03 Diagnostic Software

Steps:

Right click internet icon at right low corner to click “Open Network & Internet settings”

Click “Network and Sharing Center”

Then click “Ethernet” at your active networks

Click “Properties”

Select “Internet Protocol Version 4(TCP/IPv4)”,then click “Properties”

Select “Use the following IP address”,and select diagnostic IP address as below

IP address:172.29.127.35

Subnet mask:255.255.255.0

Then click “Advanced”

Click “Add”,then input IP address for MB SD C4 DOIP

IP Address:169.254.0.35

Subnet mask:255.255.0.0

This Post: How to Set DOIP for Benz MB SD C4 Diagnostic Kit on Win10 From ChinaOBD2 Official Blog
Please keep this link if you copy the post!