Skip to content
Menu
OBD2 Scanner Blog
  • Home
  • Car Diagnostic Tool
    • MB Star Diagnosis
    • BMW Diagnostic Tool
    • GM Tech2
    • Volvo Vocom Interface
  • OBD2 Code Scanner
    • VXDIAG
  • Tech Support
OBD2 Scanner Blog

How to retrofit BMW CCC to CIC

Posted on February 24, 2019February 24, 2019 by VCDS

Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation

CIC is the later hard drive-based system which is where the satnav maps are stored (together with your music library). CCC just has a DVD drive which has the nav maps on it. CIC generally also has a different control knob which has six buttons in front of the knob and two behind it. CCC has one large button behind the control knob. I say generally because I believe that some of the very final CCC systems had the new control knob which can confuse the picture so it isn’t a definitive identifier.

How to retrofit BMW CCC to CIC

CIC is much more user friendly and has a sort of blue background to it. So many people want to update their CCC system to CIC. And a owner share his experience of his DIY retrofit, we put it here.

 

Case: Retrofitted a CIC head unit into 2007 E93 that came with the old outdated CCC head unit. Its so much nicer and the navigation is more advanced. The Center screen is also High definition compared to the older screen. Its much easier to navigate around also.

 

What you need?

 

CIC Head unit $550 (Ebay)
CID HD screen $227 (Ebay)
iDrive controller and center console trim $105 (Ebay)
CID CAN/power connector to retrofit harnass to fit screen(61136954526) – $2.88 (dealer part)
CIC cable, connects to CID for video signal (61119185171) – $38.50 (dealer part)
USB Port (61319167196, superseded by 84109237656 ) – $26.50 (dealer part)
USB Port cable “cable for USB to glovebox” (61129196805) – $25.90 (dealer part)
CIC navigation voice emulator (Ebay) 78.76

 

It just cost you 1028.64 usd

 

You need to change the VO (vehicle order) in order for NCS to see the retrofit CIC module. To do this you need to change the production date of the car..

-Mine was #0307 changed to #0909
-Add $6VA also to VO
-Then you Fa-write the VO to CAS and FRM module…
-Default code the CIC module which should show up in NCS after changing the production date.

THen everything should be up and running with the new CIC.

I then used NCSexpert to code in:

-DVD in motion
-Legal disclaimer disabled on startup
-Fuel stop stations

 

More information: http://www.e90post.com/forums/showthread.php?t=896119

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

This Post: How to retrofit BMW CCC to CIC From ChinaOBD2 Official Blog
Please keep this link if you copy the post!

Post navigation

Prev: Prev: BMW Coding Guide: DIY Coding for Your BMW
Next: Next: How to add & program IR Key for BENZ

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Recent Posts

  • How to Use JPRO Diagnostics Performance Check Low Temp ATD Detroit Engine
  • How to Copy Sensor ID by Xhorse XTPMS Sensor and Key Tool Max Pro?
  • Yanhua ACDP2 Program BMW G Chassis BDC2 All Keys Lost on Bench
  • Scania Truck ALM 000800 Interrupted LIN Communicatin Siren
  • BMW G Series BDC2 Module Virgin and Replacement by APPRO2

Recommend OBD2 Scanner

ME9.7 ECU Engine Computer ME9.7 ECU Engine ComputerTabScan T6PT3G Diagnosis VCI for Porsche Diagnostic Tool Porsche Diagnostic Tool

Recent Comments

  • amr on MAN EOL Flash File Editor + MAN Immo Calculator Free Download
  • Pasquale Greenwald on Jungheinrich ETM/V 10-12 Tightening Torque for Screwed Connection on Brake Systems
  • VCDS on Scania SDP3 2.53.1 Diagnosis & Programming Free Download
  • Crossley on What are the functions of Iprog+ Programmer?
  • Lukas on VAG EDC15 EDC16 IMMO OFF Software Free Download

Archives

Categories

  • BMW Diagnostic Tool
  • Car Diagnostic Tool
  • Key Cutting Machine
  • Key Programming Tool
  • MB Star Diagnosis
  • OBD2 Code Scanner
  • Tech Support
  • VXDIAG

Tags

adapter Auto Pick and Decoder Car Key Copy Car Key Programmer cat Code Reader diagnostic software ECU Chip Tunning ecu programmer Ford gm handy baby Handy Baby 2 Key Programmer Handy Baby II Key Programmer HEX V2 immo iprog key Key Pro key programmer laptop Launch lish LISHI new arrivals nexiq nexiq link diesel truck interface nexiq truck diagnostic NEXIQ USB Link OBD2 obdii original program Scania VCI smart VAG COM Cable VCDS VCDS Cable VCDS VAG COM Cable vci VW wholesale X-PROG Box X-PROG Box ECU Programmer XPROG-M

Hot Selling

  • ME 9.7 ECU Engine Computer
  • MINI VCI J2534
  • NCF29XX Programmer
  • ThinkTool Pros+

Links

  • China OBD2
  • EPS Foam Machine
  • Foxdiag
  • Сканер OBD2
©2025 OBD2 Scanner Blog | Powered by chinaobd2