Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
Do you want to reset Nissan and Inifiniti TPms warning light by youself? Today I will share the method with you that do not need any tools.
Car Model:Infiniti G37
Here comes the method,please follow below process:
Step 1: Set to the following tires with the following pressures (DO NO SKIP THIS STEP) and you have to be as accurate as possible:
Tire position Tire pressure kPa (kg/cm2, psi)
Front LH 240 (2.4, PSI must be at 34)
Front RH 220 (2.2, PSI must be at 31)
Rear RH 200 (2.0, PSI must be at 29 )
Rear LH 180 (1.8, PSI must be at 26)
Step 2:Find the TPMS interface plug (it is electrical taped near the OBD2 wire near where your left leg is.) Mine is connected to a blue/purplish wire with a grey stripe.
Step 3:Use a hard wire or any other metal,i use the paper clip,put it in this pin.
Step 4:Put your key in the ignition (if you don
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!
Related Posts
Buick LaCrosse PK-13 Chip Adding & All Key Lost Programming
2019.02.24
How to use iProg+ Programmer iProg Pro Programmer to do odometer correction for ...
2019.04.27
Honda Odyssey 2016 All Key Lost Programmign by Autek iKey820
2023.06.10
How to Use Vediamo to Activate Remaining Fuel Liters for Benz
2020.05.28
Benz 211 ME97 ECU Flash Programming by DTS Monaco
2019.07.16
How to Install Mercedes Benz DTS Monaco Software
2019.07.19
Caterpillar ET 2018A Electronic Technician Software Free Download
2019.07.24
Benz SDconnect Configuration with Xentry by Cable Operation
2023.04.3
Renault CAN Clip V195 and Consult 3 III For Nissan Professional Diagnostic Tool ...
2020.11.4
Whats the Difference between KT200 and FoxFlash ?
2024.01.28