Diagzone Xdiag Subscription Renew, LAUNCH LTR-01 RF Sensor, Thinkdiag Renew , Scania SDP3 Installation
How to replace Xhorse XP-005 Battery? Here is the steps:
1.Use a 2.5mm hex wrench to remove the screws located at the bottom case. Remove the bottom plate by sliding it from front to back of machine.
2.Use a 2mm hex wrench to remove screws holding on the grip covers on each side of machine.
3.With 2.5mm hex wrench, remove screws holding the battery, unplug and remove old battery, plug in new Xhorse XP-005 battery, install and replace screws.
4.After side grips and bottom plate are screwed back on, you are finished.
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Please keep this link if you copy the post!